Dave What type of rig are you using? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to [email protected] Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sun, Mar 7, 2010 at 3:28 PM, Dave G3RXP <[email protected]> wrote: > Jack /Dave Many thanks for the reply. I thought that might be the case, > but it is a requirement in today's shack connectivity using Amps and > SteppIR > all waiting to be told the frequency of the rig. I shout but nothing > happens!!!!!!!!! > > The Fix here : > I have an external switch which connects RTS and CTS and this works fine > ,where the antenna, bandpass filters in the amp and the Steppir are > automatically updated when the VFO or band switch is changed.. However when > I log the station by tabbing to the RST field the mode and Freq do not > always give the correct value (e.g. USB will come up when Im on CW) - I > think they go to the default value. > So I have to switch the RTS and CTS off when I log the station. > No big deal but most other logging systems do work on a continuous mode > basis. However it may be that its my SPE amp that is requesting the data to > be sent - Its all too complicated for me Hi...... > > I wondered if there was a connection configuration of the RS232 cabling > whereby there would be automatic polling but would give the correct logging > details. I don't know how dxbase works on this score. Is this possible? > > > > > Thanks again Dave G3RXP > > > > > > > ----- Original Message ----- > From: "Jack" <[email protected]> > To: "Dave G3RXP" <[email protected]>; <[email protected]> > Sent: Sunday, March 07, 2010 3:02 PM > Subject: Re: [Dxbase] Fw: Another Thought For 2010 Rig polling. > > > > Dave, > > > > DXbase 2007 and prior version does not offer continuous polling as a > > feature. Polling is only executed when you click on something in the > > software that requires polling such as logging a new contact, QSY based > on > > a packet spot, or sending a packet spot. There are no options to change > > this. > > > > Regards, > > Jack > > > > ----- Original Message ----- > > From: "Dave G3RXP" <[email protected]> > > To: <[email protected]> > > Sent: Sunday, March 07, 2010 9:32 AM > > Subject: [Dxbase] Fw: Another Thought For 2010 Rig polling. > > > > > >> > >> ----- Original Message ----- > >> From: "Dave G3RXP" <[email protected]> > >> To: "Dave ve3wej" <[email protected]> > >> Sent: Sunday, March 07, 2010 1:20 PM > >> Subject: Re: [Dxbase] Another Thought For 2010 Rig polling. > >> > >> > >>> Hello Dave > >>> > >>> Thank you for your reply. I have checked the Radio config file and > >>> although I can find all the necessary comms parameters such as databits > >>> / > >>> parity etc I cannot find anyway that I can create a continous poll of > >>> the > >>> radio. There may be a parameter which I can change but my limited > >>> knowledge prevents me spotting it... At the moment DXbase only polls > the > >>> radio when you tab from the callsign field. (Once only) > >>> > >>> 73 Dave > >>> > >>> > >>> > >>> > >>> > >>> > >>> ----- Original Message ----- > >>> From: "Dave ve3wej" <[email protected]> > >>> To: "Dave G3RXP" <[email protected]> > >>> Sent: Friday, March 05, 2010 8:37 PM > >>> Subject: Re: [Dxbase] Another Thought For 2010 Rig polling. > >>> > >>> > >>>>I beleive this can be done in the dxbase ini file, under polling... > >>>> > >>>> > >>>> ----- Original Message ----- > >>>> From: "Dave G3RXP" <[email protected]> > >>>> To: <[email protected]> > >>>> Sent: Friday, March 05, 2010 4:58 AM > >>>> Subject: [Dxbase] Another Thought For 2010 Rig polling. > >>>> > >>>> > >>>>> Apologies if this has been covered > >>>>> > >>>>> The polling of the radio frequency needs to be of a continuous nature > >>>>> (egg. > >>>>> once every few seconds or so) instead of just reading the frequency > >>>>> when > >>>>> you > >>>>> Tab from the call sign field. > >>>>> I have a Stepper and SPEW 1K amp which rely on the continuous change > >>>>> of > >>>>> rig > >>>>> frequency. > >>>>> > >>>>> Dave, G3RXP > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> ----- Original Message ----- > >>>>> From: "Crownhaven" <[email protected]> > >>>>> To: "DXBase Reflector" <[email protected]> > >>>>> Sent: Friday, March 05, 2010 1:24 AM > >>>>> Subject: [Dxbase] Another Thought For 2010 > >>>>> > >>>>> > >>>>>> This might have been mentioned but logging spots below 7.150 are > >>>>>> defaulting to CW. This has turned into a great phone band since the > >>>>>> demise of the SW broadcast stations. > >>>>>> > >>>>>> Steve, N4JQQ > >>>>>> ______________________________________________________________ > >>>>>> Dxbase mailing list > >>>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase > >>>>>> Help: http://mailman.qth.net/mmfaq.htm > >>>>>> Post: mailto:[email protected] > >>>>>> > >>>>>> This list hosted by: http://www.qsl.net > >>>>>> Please help support this email list: http://www.qsl.net/donate.html > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> E-mail message checked by Spyware Doctor (7.0.0.514) > >>>>>> Database version: 6.14490 > >>>>>> http://www.pctools.com/uk/spyware-doctor-antivirus/ > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> E-mail message checked by Spyware Doctor (7.0.0.514) > >>>>> Database version: 6.14500 > >>>>> http://www.pctools.com/uk/spyware-doctor-antivirus/ > >>>>> ______________________________________________________________ > >>>>> Dxbase mailing list > >>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase > >>>>> Help: http://mailman.qth.net/mmfaq.htm > >>>>> Post: mailto:[email protected] > >>>>> > >>>>> This list hosted by: http://www.qsl.net > >>>>> Please help support this email list: http://www.qsl.net/donate.html > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> E-mail message checked by Spyware Doctor (7.0.0.514) > >>>> Database version: 6.14500 > >>>> http://www.pctools.com/uk/spyware-doctor-antivirus/ > >>> > >> > >> > >> > >> > >> > >> E-mail message checked by Spyware Doctor (7.0.0.514) > >> Database version: 6.14500 > >> http://www.pctools.com/uk/spyware-doctor-antivirus/ > >> ______________________________________________________________ > >> Dxbase mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/dxbase > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[email protected] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> > > > > > > > > > > > > > > E-mail message checked by Spyware Doctor (7.0.0.514) > > Database version: 6.14500 > > http://www.pctools.com/uk/spyware-doctor-antivirus/ > > > > > > E-mail message checked by Spyware Doctor (7.0.0.514) > Database version: 6.14500 > http://www.pctools.com/uk/spyware-doctor-antivirus/ > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
