Halvard, Those are the log fields that the program uses normally. From the Help:
"Provided these features are supported in your HF radio, DXbase will retrieve and set VFOa, VFOb, Mode, and split operation. In order for VFOb to be used, the radio must be in split mode. If VFOb information is used, it will be populated into the Notes field of the QSO log. VFOa information will be populated into the Frequency of the QSO log." So if you are using a single radio in split mode, this should be automatic, if your radio.ini setup is correct. If you are using two radios and doing it manually, then you are correct. Wes N7WS Copyright ©1999 - 2006 Scientific Solutions, Inc.Halvard Eriksen wrote: > I may be overlooking the obvious but I am unable to find out how to log > crossband qso's in DxBase. For the time being I have logged the TX band > in the Band field and used the Notes field to log the RX band. > > Can someone help me. > > 73 de Halvard LA7XK > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
