Just in case you are interested, here is the welcome text for new orders! Thanks so much for the order. You are automatically qualified for version 10 which hopefully will come out at the end of this Summer.
*Attached is your new registration key, along with instructions on how to adapt it for 64 bit operating systems as well as the user instructions. If you see no attachments to this email, please let me know. You can download the DXBase 2007 program at http://www.abrohamnealsoftware.com/files/DXBase/Dxb2007.zip You should: 1. Save the attached .zip file on the hard drive. 2. Unzip the .zip file to expose the .reg file. 3. Double click the .reg file and when asked if it's ok to store in registry, you should say yes. 4. After done, you must save the .reg file to a floppy, thumb drive, CD, or some media off of the hard drive for backup. If you are using Vista or Windows 7, there are a few things that you should do outside of the normal way to install DXBase 2007. These will not be needed when the next release comes out but until then: 1. I would recommend to create a directory (eg. DXBase) at the root of your C drive and install DXBase 2007 into it instead of accepting the default location of C:\Program Files\Scientific Solutions\DXBase2007. 2. Once you have installed DXBase, open the directory you installed it in, right-click the file called Hosts and select Copy. Then go to C:\Windows \System32\drivers\* *etc and paste the file there. This is needed because Windows 7 will not the fill be installed there automatically. 3. Microsoft changed the format of Help files from the way DXBasehas them, so you will need to install their reader in order to access the help files. You can download it here * *http://go.microsoft.com/fwlink/?LinkId=166421( http://go.microsoft.com/fwlink/?LinkId=166421) If you are using Vista 64bit or Windows 7 64bit versions, there is a document attached to this email, instructing you on how to modify your registration file to be compatible with those versions. If you get a stern warning from Vista or Windows 7 about clicking the registration file is dangerous, do not worry, its loading the registration key into your system registry. If you can ignore the warnings, its okay. If, however, it blocks you from doing the registration, go to the Control Panel, select User Accounts and click on the hyperlink to change your User Account Control settings. Move the slider to the bottom (no warnings), click OK and then double-click the registration file again. * * **Finally, after installation, download the prefix update file at http://www.abrohamnealsoftware.com/wa6axe2/pfxupdates.zip to bring your database up to date! **Thanks so much for the order. You are automatically qualified for version 10 which hopefully will come out at the end of this Summer. Attached is your new registration key, along with instructions on how to adapt it for 64 bit operating systems as well as the user instructions. If you see no attachments to this email, please let me know.* * You can download the DXBase 2007 program at http://www.abrohamnealsoftware.com/files/DXBase/Dxb2007.zip You should:* * 1. Save the attached .zip file on the hard drive. 2. Unzip the .zip file to expose the .reg file. 3. Double click the .reg file and when asked if it's ok to store in registry, you should say yes. 4. After done, you must save the .reg file to a floppy, thumb drive, CD, or some media off of the hard drive for backup. If you are using Vista or Windows 7, there are a few things that you should do outside of the normal way to install DXBase 2007. These will not be needed when the next release comes out but until then: 1. I would recommend to create a directory (eg. DXBase) at the root of your C drive and install DXBase 2007 into it instead of accepting the default location of C:\Program Files\Scientific Solutions\DXBase2007. 2. Once you have installed DXBase, open the directory you installed it in, right-click the file called Hosts and select Copy. Then go to C:\Windows \System32\drivers\* *etc and paste the file there. This is needed because Windows 7 will not the fill be installed there automatically. 3. Microsoft changed the format of Help files from the way DXBasehas them, so you will need to install their reader in order to access the help files. You can download it here * *http://go.microsoft.com/fwlink/?LinkId=166421( http://go.microsoft.com/fwlink/?LinkId=166421) If you are using Vista 64bit or Windows 7 64bit versions, there is a document attached to this email, instructing you on how to modify your registration file to be compatible with those versions. If you get a stern warning from Vista or Windows 7 about clicking the registration file is dangerous, do not worry, its loading the registration key into your system registry. If you can ignore the warnings, its okay. If, however, it blocks you from doing the registration, go to the Control Panel, select User Accounts and click on the hyperlink to change your User Account Control settings. Move the slider to the bottom (no warnings), click OK and then double-click the registration file again. * * **Finally, after installation, download the prefix update file at http://www.abrohamnealsoftware.com/wa6axe2/pfxupdates.zip to bring your database up to date!* Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 On Wed, Sep 29, 2010 at 10:21 PM, Neal Campbell <[email protected]> wrote: > Hi Tim, > > The updater that is included (as a link) in the "welcome" email is Joe's > updater so you probably have it already. If not, let me know. > > There is no link yet for the new updater since we haven't heard what the > new prefixes will be. > > > 73 > Neal Campbell > Abroham Neal Software > www.abrohamnealsoftware.com > (540) 645 5394 > > > > > > > On Wed, Sep 29, 2010 at 9:07 PM, kq8m <[email protected]> wrote: > >> Did I miss the link. I don't think I have seen it. Could you resend it? >> >> Thanks, >> Tim, KQ8M >> >> >> -----Original Message----- >> From: [email protected] [mailto: >> [email protected]] >> On Behalf Of Neal Campbell >> Sent: Wednesday, September 29, 2010 8:04 PM >> To: [email protected] >> Cc: dxbase >> Subject: Re: [Dxbase] Country Database >> >> The prefix database update program that you received a link for is the >> latest. As soon as the ITU and the ARRL figure out the new prefixes from >> the >> Dutch Antilles breakup I will be releasing a new update program (which >> will >> also bring the refdata.mdb in sync with the database from clublog.org). >> >> 73 >> Neal Campbell >> Abroham Neal Software >> www.abrohamnealsoftware.com >> (540) 645 5394 >> >> >> >> >> >> >> On Wed, Sep 29, 2010 at 7:49 PM, Thomas Johnson <[email protected]> >> wrote: >> >> > DXBase 2007 now... >> > TJ >> > >> > On Wed, Sep 29, 2010 at 6:49 PM, <[email protected]> wrote: >> > >> > > What version DxBase ? >> > > Dave N8DC >> > > >> > > >> > > ----- Original Message ----- >> > > From: "Thomas Johnson" <[email protected]> >> > > To: [email protected] >> > > Sent: Wednesday, September 29, 2010 7:43:39 PM >> > > Subject: [Dxbase] Country Database >> > > >> > > Hi all, >> > > How do I update my database with the latest countries? >> > > I am getting back in to radio, and pulled out my old MDB file and am >> > > starting to look at my countries list and found that my LOTW count >> doesnt >> > > match my DXBase records... Oops.. >> > > I hope its not too hard... >> > > >> > > Thanks, >> > > TJ >> > > ______________________________________________________________ >> > > Dxbase mailing list >> > > Home: http://mailman.qth.net/mailman/listinfo/dxbase >> > > Help: http://mailman.qth.net/mmfaq.htm >> > > Post: mailto:[email protected] >> > > >> > > This list hosted by: http://www.qsl.net >> > > Please help support this email list: http://www.qsl.net/donate.html >> > > >> > ______________________________________________________________ >> > Dxbase mailing list >> > Home: http://mailman.qth.net/mailman/listinfo/dxbase >> > Help: http://mailman.qth.net/mmfaq.htm >> > Post: mailto:[email protected] >> > >> > This list hosted by: http://www.qsl.net >> > Please help support this email list: http://www.qsl.net/donate.html >> > >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
