In this version 2.20 of my Refdata/Logbook Checker program, I have ONE thing automated -- " if " the program finds ANY Lat/Lon (+/- sign missing) errors in your Prefix-Pri table or your Alias-Map table or your Call-Map table, ONCE you finish running the Analyze routine, the BUTTON next to it is called "Correct Lat/Lon" -- press this button and all of the RED boxes will be GREEN -- and all Lat/Lon corrections automatically made in your Refdata.mdb file ..
Then -- I also have added some extra lines to the procfile.txt file to give better details about what is or could be the problem in the Prefix-Pri table .. So, when you press the View button (if it is not greyed-out) the TXT file should have more info/details to help you thru the process. You might note also -- that I reversed the LOGIC in the Prefix-Pri area's LAT/LON COUNT -- in that I am now counting the ERRORED Prefixes -- so, a count of ZERO will now bring up the GREEN boxes -- before the count for green was 400 - because I was looking at the count of the good lines... I am going to let this version sit there for a while -- many of you are probably already GREEN across the BOARD -- after using previous version(s) of my program. So, this new version is for any of the OTHER DXbase2007 users who would like to simply check their Refdata and Logbook files. The NEW LINK for the version 2.20 is located on my Ham Radio homepage at: http://www.navycthistory.com/wa6axe/selection.html TNX to ALL of you who have helped me with this project!!! 73 Joe wa6axe ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
