I think we all know that.. its just easier on the fly to do it with a mouse click ! Its too bad when you do that the data coming thru DxBase doesn't change with CC user . Simplicity i think was the reason on the original post . Dave N8DC
----- Original Message ----- From: "Greg Engle" <[email protected]> To: [email protected], "dxbase" <[email protected]> Sent: Saturday, May 7, 2011 9:33:46 AM Subject: RE: [Dxbase] DXBase Suggestion You can do that right now with a simple command to your spotting node! Go here for all the filters/users manual http://www.dxcluster.org/main/ 7.1 Filters to accept spots based on frequency <http://www.dxcluster.org/main/filtering_en.html> Syntax: accept/spot [0-9] freq <range> or accept/spot [0-9] on <range> Important: as noted before, both freq and on are exactly the same and can be used interchangeably. For range, you can specify a frequency like 7040, a range of frequencies like 0/30000 ( the whole HF spectrum) or use any of the band/region names defined in the SHOW/BANDS command (see above). Examples... This will pass on a HF spots only from 0 to 30,000 kHz and dump all others. accept/spot 1 on 0/30000 This passes on all spots in the frequency range 144000 -> 148000 kHz and trash all others. accept/spot 2 freq 2m This rule will only pass on spots on 6m, 4m, 2m, and 220 and reject all others. accept/spot 3 on vhf This rule will pass on all spots on the 160m, 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m bands and all spots on 70cm and 23cm bands only. All other spots are trashed. accept/spot 4 freq hf and freq uhf -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: May 07, 2011 5:30 AM To: dxbase Subject: Re: [Dxbase] DXBase Suggestion I agree as I do the same thing . I really like that feature in CC user . How about it Neal ? Dave N8DC ----- Original Message ----- From: "Crownhaven" <[email protected]> To: "DXBase Reflector" <[email protected]> Sent: Saturday, May 7, 2011 8:14:25 AM Subject: [Dxbase] DXBase Suggestion It would be nice to have a future in DXB, similar to CC User, that allows one to click on a specific band and only see spots from that band. Right now I can toggle back to CC User but it would be even nicer to have this ability and see the summary screen at the same time. Steve, N4JQQ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
