Also here on Win 7 64 SP1 and DX Atlas 2.25 Greg N6PYI
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of ILYA ZOZIN 4Z1UF Sent: May 09, 2011 1:00 PM To: [email protected] Subject: Re: [Dxbase] DxBase and DX Atlas Running here DX Atlas ver. 2.25 with Dxbase 2007, on XP Pro 2002 (SP3) system, works just fine. 73! ILYA de 4Z1UF > -----Original Message----- > From: [email protected] [mailto:dxbase- > [email protected]] On Behalf Of Dave Gmail > Sent: Monday, May 09, 2011 10:34 PM > To: 'KB1FJ'; [email protected] > Subject: Re: [Dxbase] DxBase and DX Atlas > > Same here, Neil is aware, but no solution yet... op: win 7(64B) > > > > > Dave ve3wej/ve3ie > > > > -----Original Message----- > From: [email protected] [mailto:dxbase- > [email protected]] On Behalf Of KB1FJ > Sent: May-09-11 9:30 AM > To: [email protected] > Subject: [Dxbase] DxBase and DX Atlas > > I am running XP Pro Version 2002 with SP3. I recently upgraded to a > new mother board and a AMD Phenom 9850 Quad-Core processor. In doing this I > installed a new copy of DxBase 2007 and a new DX Atlas ver. 2.25. At first > DxB could not find DX Atlas. Several computer restarts later and a > re-install of DX Atlas, DxB found DX Atlas. It opens it and a few > seconds later both DxB and DX Atlas shut down. I have just enough > time to see if I > can control DX Atlas and I can move the MAP around before it shuts down. > Also, while it is open, DxB will not let me do anything with it like > talk to > Ve7cc. It is like it is frozen. I have both programs opened on > separate monitors so I can easily move between them. But, 5 or 6 > seconds is all I get before they shut down. > > > > I have remove all programs I think may be in conflict from my start-up > folder thinking the problem may be somehow connected to other programs. By > the way, I am running VE7CC VER. 2.3971. It does communicate with > DxB in that new spots will show up in DxBase during those 5-6 seconds > that both DxB > and DX Atlas are actually running together but DxB will not talk to VE7CC. > > > > I believe that DX Atlas is working ok as a standalone program and I > also believe that DxBase is working ok as a standalone program. Just > not good together. > > > > Both programs worked together before I upgraded. However, I was > using ver > 2.21 of DX Atlas then. Maybe I will try to get another copy of 2.21 > and start over. > > > > Any help would be greatly appreciated. > > > > Thanks, Ben KB1FJ Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
