-----Original Message-----
From: Ian C Frith - G4GIR
Sent: 22 December, 2011 09:34
To: Dave Gmail
Subject: Re: [Dxbase] Radio 2 QSY on VHF
Hi Dave
Well No, it doesn't switch the IC7000 when selecting any 2 MTR frequency in
any combination.
except FOR:-
Tools
Set HF Frequency
VFOa 145000.00
MODE FM
Click Radio 2
QSY
It then switches the IC7000 to 145.000.00 FM.
What Radio do you use on VHF connected to Dxbase?
You need to select
Tools
Options
User Options
Log Defaults
and select Alternate in the Band Plan Selection. Then the Alternate Plan can
be seen in the
Tools
Options
Band Plan Mapping
I have set the 2mtr and 70cms bands to Radio 2 in both Primary and Alternate
Plans but it still wont switch
Frustrating.
Is there anyone else out there that can switch a Radio to a 2mtr spot off
the cluster in Dxbase?
73
Ian G4GIR
-----Original Message-----
From: Dave Gmail
Sent: 21 December, 2011 17:42
To: 'Ian C Frith - G4GIR'
Subject: RE: [Dxbase] Radio 2 QSY on VHF
Yes,
But I did nothing with "alternative" on the primary mapping table, you find
the band range you want, and select "radio-2"
I don’t know where the alternative is. I will have to look
Don’t see it..
Does the band change work if you select radio 2 manually from the drop down
menu bottom of "tools"
-----Original Message-----
From: Ian C Frith - G4GIR [mailto:[email protected]]
Sent: December-21-11 11:24 AM
To: Dave Gmail
Subject: Re: [Dxbase] Radio 2 QSY on VHF
Yes I changed the ALTERNATE Band mapping page with Radios set to Disable,
and selected ALTERNATE in the Log Defaults Tab.
Can you select a 2 mtr Spot and have the radio switch?
-----Original Message-----
From: Dave Gmail
Sent: 21 December, 2011 15:24
To: 'Ian BB'
Subject: RE: [Dxbase] Radio 2 QSY on VHF
Did you change the bandplan mapping page under the tools/options menu
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Ian BB
Sent: December-21-11 2:36 AM
To: DXBASE .com
Subject: [Dxbase] Radio 2 QSY on VHF
Hi All
I have been playing with the 2 radio option in Dxbase.
I can’t get the Radio 2 to QSY when a 2 meter spot is clicked on, all HF
spots are ok.
I have IC756 as radio 1 and IC7000 as Radio 2.
I am using Alternate Band Plan Mapping and have disabled Radio 1 & Radio 2.
I have tried swapping the designations around i.e making the IC7000 Radio 1
but still wont QSY on a 2 mtr spot.
However Dxbase will read a 2 meter frequency ok into the log!
Any Ideas as to why it wont QSY the radio?
73
Ian G4GIR
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
