Hi Dave and others :) Is printing labels one of the difficulties with v1.07 and Win7? DXbase works my printer for other things, eg Log extract printing, but is not able to print labels for QSL cards. In the printing sequence, once I press "Print", there is a quick flash of a small window in the middle of the screen, but nothing is sent to the printer. The printer is working fine with other software 73David http://www.ve3vid.webs.com/
Date: Mon, 18 Aug 2014 17:12:18 -0400 Subject: Re: [Dxbase] Win7 config? From: ve3...@gmail.com To: ve3...@hotmail.com windows 7 blocks several feasture with the security on the program files folders, so you should remove and reinstall off the root of c.. this has been documented Dave GarberVE3WEJ / VE3IE On Sun, Aug 17, 2014 at 1:47 PM, David VE3VID <ve3...@hotmail.com> wrote: I installed in the default folder dg http://www.ve3vid.webs.com/ Date: Sun, 17 Aug 2014 12:47:34 -0400 Subject: Re: [Dxbase] Win7 config? From: ve3...@gmail.com To: ve3...@hotmail.com also, did you state?? dxbase should NOT be in program files folder ( either one) install it in c:\dxb2007 or something like that Dave GarberVE3WEJ / VE3IE On Sun, Aug 17, 2014 at 12:46 PM, Dave ve3wej <ve3...@gmail.com> wrote: also if you want qrz to work correctly, you may also want to get the last version ( 1.10) Dave GarberVE3WEJ / VE3IE On Sun, Aug 17, 2014 at 12:45 PM, Dave ve3wej <ve3...@gmail.com> wrote: did you take the dxbase.ini file from the windows folder, and transfer it??? and the radios.ini file Dave Garber VE3WEJ / VE3IE On Sun, Aug 17, 2014 at 12:29 PM, David VE3VID <ve3...@hotmail.com> wrote: Hmmm, Thanks Dave, but it didn't work. I copied the old .CO files into the new Windows 7 program folder. It appears to have had no effect. When the logging screen appears the sub windows (eg Logging, DX info, Summary) are still in the new install state. As well, none of my RADIO1 or 2 CAT info is configured. A previous reply to this thread suggested copying the .INI files from the old installation. Any thoughts.... David http://www.ve3vid.webs.com/ Date: Fri, 15 Aug 2014 15:43:22 -0400 Subject: Re: [Dxbase] Win7 config? From: ve3...@gmail.com To: ve3...@hotmail.com copy *.co files into your new install folder, overwriting the installed versions. Dave GarberVE3WEJ / VE3IE On Fri, Aug 15, 2014 at 11:04 AM, David VE3VID <ve3...@hotmail.com> wrote: Hello everyone I installed DXBase2007 v1.05 back onto my PC after updating the OS to Windows7. Is there any way to recover my previous layout configuration? The layout has reverted to a 'fresh install' look.(I have all the files from the previous install under XP) 73David http://www.ve3vid.webs.com/ ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
