Just connecting up new Omni VII radio to DXbase 2007. Have comport set OK I believe as the program will change mode after about 4 seconds, but ONLY the mode when importing a cluster spot. I do have the Omni VII radio.ini and the radio menu shows the Omni VII which is selected. Here are the settings I'm using (I can find nothing in the O7 manual regarding settings). Checked on: Connect HF Radio 1 Serial interface Com 3 as designated by USB/Serial driver software and shown in device mgr Baud 57600 Parity None Word length 8 Stop Bits 2 DTR High RTS High and CTS all left unchecked. I've seen this very slow response on other radios when settings were not correct but I have no guidance on this radio for settings. Thanks in advance. 73, Art, K4YYL ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
