Merv and ALL:
I logged a DUMMY QSO using DXbase2007 ver 1.10 / My WSJT-X ver 1.4 BRIDGE / and WSJT-X ver 1.7 program. Then I took screen-shots of both my LOG WINDOW within DXbase2007 - and - also I took that MDB logbook file into Access97 and got more screen-shots. The UPPER portion of the below listed jpg file shows my LOG Window -- you will see that the RSTS and RSTR columns are BLANK (Normal for the way DXbase2007 is currently programmed) -- BUT, you will also see that my BRIDGE program automatically places both the RSTS and RSTR reports into the Notes column of the logbook mdb file -- and also automatically places the RSTS into the Special-1 column and places the RSTR into the Special-2 column. The LOWER portion of the below listed jpg file show the ONE DUMMY ENTRY as it looks when viewing my mdb file within ACCESS97 ... You CAN see that the RSTS entry shows the true signal report of " -12 " and that the RSTR entry also shows the true signal report of " -10 " ... These are strictly DUMMY REPORTS.. And you can also see in the lower portion screen-shots that Notes field shows RSTS -12 RSTR -10 -- and -- you can also see the REPORTS in the Special-1 and Special-2 fields. Hope this is helpful to all .. LINK to the BIG SCREEN-SHOT http://www.navycthistory.com/jt65_screen-shots.jpg 73 Joe wa6axe Joseph Glockner [email protected] ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
