Hi All Joe WA6AXE has been emailing me and has solved this CW-R issue
If you have an IC7300 and want to use CW-R then thank Joe!! See the settings below Many thanks to Joe again! 73 Fred G4BWP -------- Forwarded Message -------- Subject: EXTRA Info ---- Re: [Dxbase] IC7300 CW-R Date: Thu, 1 Jun 2017 17:56:48 +0000 From: Joe WA6AXE <wa6...@hotmail.com> To: Fred Handscombe <f...@g4bwp.com> Fred, TRY this -- NOTE!! Since I do not have an IC-7300 -- I am only taking a guess on this fix ... In the Radios.ini file for [ICOM_IC-7300_SPLITOK] CHANGE the following entry from P_CWR=3 to read P_CWR=7 THEN - CHANGE the following entry from CWR=3 to read CWR=7 THEN - CHANGE the following entry from DefaultCWR=3 to read DefaultCWR=7 Then SAVE your Radios.ini file and execute DXbase2007 again and this time - try to log CW-R Fred --- In DXbase2007 Radios.ini file -- if the MODE is NOT part of what DXbase was built-around .. We normally set that mode to ZERO .. But, for the sake of CW versus CW-R -- ICOM has CW as a 3 and CW-R as a 7 And,. since DXbase2007 doesn't have a CW-R -- I am NOT too sure that the above mentioned FIX will even work... You might ask Neal for some assistance on this also!! 73 Joe wa6axe ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
