Greetings: I'm having difficulty getting the IC 7300 to talk to DXBase properly? I have the Radio 2 button fixed and I can get DXBase to read Frequency / Mode when I type in a call. However, it won't change Frequency / Mode when I click on a spot.
Note, I have my USB port set to drive CW, and PTT. I also use the built in CODEC for AFSK. Do I need to split CI-V and USB? IC 7300 Setup CI-V Baud Rate = AUTO CI-V USB Port = Link to Remote CI-V USB Baud Rate = AUTO, USB Send = RTS USB Keying = CW USB RTTY = Off USB Serial Function = CI-V DXBase Setup Radio 1 Kenwood TS 2000, works fine Radio 2 IC7300 Load Band Mode from HF Xcvr Connect Radio 2 DTR, RTS, CTS are not checked 8, N, 1 Baud Rate 19200, if I change the baud rate I can no longer read the 7300's VFO. One caveat, CAT control seems to work with WSJT and N1MM. However I do need to change CI-V USB Port to Link from Remote when running N1MM. I understand the Band Map needs to be changed even though I Load Band Mode from HF Xcvr. 73 fred WX1S ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
