Re: [Dxbase] DXBase and IC7610

Fred Handscombe Mon, 20 May 2019 06:13:36 -0700

Greg

Cut and paste all the below into "RADIOS.INI" found in your DXBase2007install directory


Make a backup first of course

73 Fred
G4BWP

www.g4bwp.com
Hoarder of fine valved radios

[ICOM_IC-7610]
#IC-7610 revision by WA6AXE
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3

LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x98

PACING=5
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0

DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3

SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd)eoc(100)SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)eoc(100)GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16)eoc(100)

PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)

SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd)eoc(100)SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)eoc(100)GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16)eoc(100)

PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)

SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)eoc(100)GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13)eoc(100)

PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)

SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter")hex(fd) eoc(100)

GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)

PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode%filter") hex(fd) eoc(0)

SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd)eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd)eoc(100)GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12)eoc(100)

PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)


------ Original Message ------
From: gya...@dreamscape.com
To: dxbase@mailman.qth.net
Sent: 20/05/2019 01:50:35
Subject: [Dxbase] DXBase and IC7610

Is any one using DXBase with an IC7610?  If so, would you share your
settings?  I have been trying to get DXBase to talk to 7610 without any
success.





Thanks,



Greg, WB2BIN

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dxbase] DXBase and IC7610

Reply via email to