Greg, I tried emailing you directly, but the email bounced.
I got my 7610 working with DXBase very easily my modifying the C-IV address
in the IC-7600_DW_ok_SPLIT_ok radio.ini file to Address=0x98. Easy cut and
paste. Any of the 7600 radio.ini files will work just fine if you change the
C-IV address. Here's the entire set with my adder for the 7610.
73
Lou, W0FK
[ICOM_IC-7610-7600_DW_ok_SPLT_ok]
#IC-7610 - 7600 DUALWATCH OK and SPLIT OK by WA6AXE N5IN W0FK
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3
LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x98
PACING=5
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd)
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(100) hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c1) hex(fd) eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter")
hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter")
hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd)
eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(fd) rrs(13) eoc(100)
PrsSplit= hex(%dummy, 11) hex(%split) hex(%dummy) eoc(0)
Message: 3
Date: Sun, 19 May 2019 20:50:35 -0400
From: < <mailto:[email protected]> [email protected]>
To: < <mailto:[email protected]> [email protected]>
Subject: [Dxbase] DXBase and IC7610
Message-ID: < <mailto:[email protected]>
[email protected]>
Content-Type: text/plain; charset="us-ascii"
Is any one using DXBase with an IC7610? If so, would you share your
settings? I have been trying to get DXBase to talk to 7610 without any
success.
Thanks,
Greg, WB2BIN
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
