Tele,
TWO things are possible here ...
1. Check the OPR CALL for each of the 400 QSOs you say are missing.. If the
2. OPR CALL is NOT registered in your DXbase2007 REG File - then they WILL
NOT
3. be exported.. You will need a NEW Reg File..
2. MAKE SURE in the Selection Wizard (ADI EXPORT) that there is NOT
repeat NOT
any CHECKMARKS anywhere on the main window and also the QSO Filters
window.
This way - you will be able to export ALL of the QSOs.
73 Joe wa6axe
1.
________________________________
From: [email protected] <[email protected]> on behalf
of Telesforo Figueroa <[email protected]>
Sent: Tuesday, April 19, 2022 11:11 AM
To: [email protected] <[email protected]>
Subject: [Dxbase] Lost QSOs after downloading an ADIF file
Hello:
I have downloaded a complete log from my DXBase2007 as an ADIF file, but the
resulted amount is about 400 QSO,s less.
What is wrong or what did I did wrong?
Tele
KP4P
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
