Hi Richard,
Yeah, I have tried it and as it turns out,
Gabriel's example is also broken.
With the three panels showing...
Click on the two top links from two panels, one after the other
(fast enough so that the first click doesn't have time
to load the document, which incidently isn't fast at all)
Then you will find that it stops both of them dead.
And subsequently all loading from any panel.
.. :-(
-----Original Message-----
From: Richard Bennett [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 23 May 2001 6:15 PM
To: [EMAIL PROTECTED]
Subject: Re: [Dynapi-Dev] LoadPanel die-ing
Have you checked out loadlayer yet?
Gabriel spent some time on exactly the same problems recently, and it's
pretty cool, it re-directs links inside the loaded documents to point to the
loadlayer, the main doc, or a popup.
http://www.resass.f2s.com/dynapi/Gabriel_Suchowolski_Examples/loadlayer.html
Richard.
----- Original Message -----
From: "Ramon Buckland" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: 23 May, 2001 09:29
Subject: RE: [Dynapi-Dev] LoadPanel die-ing
>
> Hi All,
>
> Jus a note on this issue.
>
> When it is running off of the webserver (ie
>
>
http://server/dev/code/dhtml/dynapi-2.53/dynapi/examples/dynapi.gui.loadpane
> l.html
>
> it fails if you click on the 'file 1 and file 2' links too much (not hard
to
> do.. and
> especially if the server responding is slow)
>
> but locally via the LAN from the server in IE5.5 .. no problems (as below)
>
> O:/code/dhtml/dynapi-2.53/dynapi/examples/dynapi.gui.loadpanel.html
>
> *odd* no ?
>
> Ramon
>
>
> -----Original Message-----
> From: Ramon Buckland
> Sent: Wednesday, 23 May 2001 3:58 PM
> To: '[EMAIL PROTECTED]'
> Subject: [Dynapi-Dev] LoadPanel die-ing
>
>
> Hi All,
>
> It has been over 8 weeks since I have touched the DynAPI and I was
wondering
> what the status of the Loadpanel is about it dieing when fired with too
many
> events..
>
> ie, tell it to load with setURL and before it loads, fire it another and
it
> dies...
>
> I have looked at the latest 2.53 (i assume it was) and the problem is
still
> there,
>
> does anybody have any ideas as to what causes it and where/how it could be
> solved
> (i am willing commit many hours to it, as a major development i am
involved
> in uses this
> core part of the DynAPI).
>
> Thoughts, comments :)
>
> Kind Regards
> Ramon
> ----------------------------------------------------
> Ramon Buckland
> Network Systems Engineer
> email: [EMAIL PROTECTED]
> web: www.f5.com.au
> phone: (07) 3257 7900
> fax: (07) 3257 7955
> f5. What ever it takes.
> ----------------------------------------------------
>
>
>
> _______________________________________________
> Dynapi-Dev mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/dynapi-dev
>
> _______________________________________________
> Dynapi-Dev mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/dynapi-dev
>
_______________________________________________
Dynapi-Dev mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/dynapi-dev
_______________________________________________
Dynapi-Dev mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/dynapi-dev
