I've uploaded the fix to the cvs. Please checkout the
files to see if it's working ok. Thanks again for the
example.
--
Raymond Irving
--- Doug Melvin <[EMAIL PROTECTED]> wrote:
> In creating the attached example I discovered the
> following:
> The width of the button is being changed, but the
> anchor parameters are not
> being utilized after the size change.
>
> When you click the link to change to width to 1
> pixel you will notice that
> the button is set to a width of 1, but the button's
> left position is not
> changed..
> Meaning, that the parameter of right:0 is no longer
> honored
>
> You can see the same when you set the height of the
> layer, the layer's x
> potion doe snot change,
> therfore not honering the bottom:0 parameter.
>
> As the only parameters passed to setAnchor (in this
> case) are
> right:0,bottom:0
> one would dexpect that after changing the size, that
> the layer would be
> re-anchored to
> right:0,bottom:0
>
> On other words, the anchors work great, until you
> change the size of the
> layer,
> at which point the anchors are no longer honored..
>
> ----- Original Message -----
> From: "Raymond Irving" <[EMAIL PROTECTED]>
> To: "Doug Melvin" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Friday, March 28, 2003 7:13 AM
> Subject: Re: [Dynapi-Dev] anchors:
>
>
> >
> > --- Doug Melvin <[EMAIL PROTECTED]>
> wrote:
> > > a point.. it seems that you must define the size
> of
> > > a layer before you set it's anchor,
> > > unless you intend to set all 4 dimension in the
> > > anchor.. can this be fixed somehow?
> >
> > Please send me a working example of the above and
> I'll
> > take a look at it.
> >
> > > And once the anchor is set, even if you did not
> > > define it left (for instance) you can not resize
> > > thelayer..
> > >
> > > It would be nice I I could anchor a layer to the
> > > top+right of it's parent, but still be able to
> > > change it's width or hight
> > > afterwards.
> >
> > That should be possible with
> > setAnchor({top:0,right:0}). You should then be
> able to
> > change the width and height without any problem at
> > all. If you can't change the width/height after
> > setting the anchor then send me a working example
> so I
> > can take a look at it
> >
> > --
> > Raymond Irving
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> live on your desktop!
> > http://platinum.yahoo.com
> >
> >
> >
>
-------------------------------------------------------
> > This SF.net email is sponsored by:
> > The Definitive IT and Networking Event. Be There!
> > NetWorld+Interop Las Vegas 2003 -- Register today!
> >
>
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > _______________________________________________
> > Dynapi-Dev mailing list
> > [EMAIL PROTECTED]
> >
>
http://www.mail-archive.com/[EMAIL PROTECTED]/
> >
>
> ATTACHMENT part 2 application/x-compressed
name=anchor-issue.zip
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
-------------------------------------------------------
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
_______________________________________________
Dynapi-Dev mailing list
[EMAIL PROTECTED]
http://www.mail-archive.com/[EMAIL PROTECTED]/
