As far as I can tell once you are trying to do positioning within a table all bets are off. It seems to have to do with the cellspacing & cellpadding...which results in the positioning element reporting an incorrect position. If you have access to all the tables you can potentially make it work by explicitly setting cellspacing and cellpadding to zero in all cases, but that's not really a practical solution.
Additionally if you only have 'access' to a portion of a page (I'm working on a JSP page and All I know is that my particular work is going to show up 'somewhwere' on the page, but not where), you have virtually no shot at getting the layer to position properly on both browsers (again because this area will be inside tables and it seems impossible to get the accurate x & y positions for it). That's my experience thus far...and haven't found anything on the web or gotten any advice to make positioning within tables work properly. -J >From: "Scott Prendergast" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Subject: [Dynapi-Help] Dynapi layer positioning (help) >Date: Thu, 4 Apr 2002 16:54:25 -0800 > >I had an idea about relative positioning, and wanted to get some >feedback... > >Would it be possible to display a 1 pixel image in a <td> cell, then use a >script to locate the coordinates of the image, then plugin the position >into the dynapi layer ?? Not sure about resizing, but would this work in >theory ?? > >Thanks, >Scott _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com _______________________________________________ Dynapi-Help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dynapi-help
