Hi,
On 08-04-19 19:21, Andy Shevchenko wrote:
On Thu, Apr 04, 2019 at 04:43:03PM +0200, Hans de Goede wrote:
On 29-03-19 16:53, Hans de Goede wrote:
On 3/29/19 2:59 PM, Семен Верченко wrote:
Hmm, so 4 ethernet cards and 4 enabled / marked as critical clocks.
Supporting this through get_clk is going to require a DMI table in the igb
driver
combined with checking which PCI "slot" the card is to get the correct clock
for each ethernet controller.
I believe tht just restoring the old behavior to mark all clocks enabled
on boot as critical, but then limited to this system based on a dmi match,
is the best solution here.
Andy?
Andy? Now that we've the patch ready for the other system which needs to
have the CLK_IS_CRITICAL workaround and enables this based on DMI info,
I believe the best fix for this system is to simply add it to that DMI
table?
I reviewed v4, supposed to go via CLK tree.
Right, but that patch adds the quirk for the system with the USB hub,
do you agree, that given that each ethernet controller seems to be
using its own clock, it is best to use a DMI quirk for this case too?
If you agree then someone needs to prepare a follow-up patch on top of
v4 which adds the DMI info for this board to the table.
Regards,
Hans
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
