Denys Fedoryshchenko wrote:
> Hi again
> 
> I moved from PCI Realtek 8169 to onboard PCI-Express e1000e, and situation
> become worse. Strange? Yes.
> 
> Here is info
> Load and error rate: 
> 
> MegaRouter-KARAM /sys # ifconfig eth1;sleep 10;ifconfig eth1
> eth1      Link encap:Ethernet  HWaddr 00:19:D1:71:5F:33
>           inet addr:192.168.20.10  Bcast:0.0.0.0  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:91991642 errors:0 dropped:1803444 overruns:0 frame:0
>           TX packets:91914611 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:316112765 (301.4 MiB)  TX bytes:138303107 (131.8 MiB)
>           Memory:90300000-90320000
> 
> eth1      Link encap:Ethernet  HWaddr 00:19:D1:71:5F:33
>           inet addr:192.168.20.10  Bcast:0.0.0.0  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:92812514 errors:0 dropped:1815490 overruns:0 frame:0
>           TX packets:92734865 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:739941322 (705.6 MiB)  TX bytes:560547138 (534.5 MiB)
>           Memory:90300000-90320000
> 
> System load (there is no NAT, no shapers, just routing, around 600-700 
> routes):
> MegaRouter-KARAM /sys # mpstat 1
> Linux 2.6.26-rc6-git2-build-0029 (MegaRouter-KARAM)     06/16/08
> 
> 22:36:36     CPU   %user   %nice    %sys %iowait    %irq   %soft  %steal  
> %idle    intr/s
> 22:36:37     all    0.00    0.00    0.00    0.00    0.00    1.49    0.00  
> 98.51  19764.00
> 22:36:38     all    0.00    0.00    0.50    0.00    0.00    0.50    0.00  
> 99.01  19888.00
> 22:36:39     all    0.00    0.00    0.00    0.00    0.00    0.50    0.00  
> 99.50  19642.00
> 22:36:40     all    0.00    0.00    0.00    0.00    1.01    9.05    0.00  
> 89.95  19543.00
> 
> (system almost idle)

but has 20000 interrupts per second! that's hardly idle by any account :)

what options did use to load e1000e? can you show the relevant dmesg parts? post
contents of /proc/interrupts?


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel

Reply via email to