Stephen Hemminger wrote: > Running on latest (pre 2.6.28) mainline kernel, my new 82571EB comes > up > with wrong speed. The PHY seems confused, because this port is > gigabit > and actually gets 100Mbit throughput. The ethtool data says in > negotiated 10Mb/s which is wrong. And the supported modes aren't > include 1000baseT. > > Driver is e1000e
Thanks for the report Stephen, can I get you to download and run the ethregs tool from http://prdownloads.sourceforge.net/e1000/ethregs-1.1.tar.gz The output from that tool would be most useful. We may have to investigate the phy register settings as well, but that will have to be another debug pass to add the for loop to print phy registers 0-31 (maybe to add to ethtool -d output) as ethregs can't drive MDIO cycles. I haven't heard of any similar issues yet but will take a look through the code. Also please dump your eeprom with ethtool -e and send to me (you can pull your mac address from the first 6 bytes if you care) ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel
