I'm a sucker for punishment, so I tried again.
First time the ports were open--probably a useful detail.
Worked better with the ports closed, but
did get this kernel warning with traceback.
# ethtool -A eth4 autoneg off rx off tx off
# ethtool -A eth5 autoneg off rx off tx off
# ethtool -A eth6 autoneg off rx off tx off
# ethtool -A eth7 autoneg off rx off tx off
KERNEL WARNING
# ethtool -G eth4 rx 4096 tx 4096
# ethtool -G eth4 rx 4096 tx 4096
# ethtool -G eth4 rx 4096 tx 4096
# ethtool -G eth4 rx 4096 tx 4096
Include entire 'dmesg' this time.
David
P.S. Interfaces are UP, but with no IP assigned.
App uses PACKET sockets.
Initializing cgroup subsys cpuset
Linux version 2.6.27.1 ([EMAIL PROTECTED]) (gcc version 4.3.0 20080428 (Red Hat
4.3.0-8) (GCC) ) #1 SMP Fri Oct 17 20:57:57 EDT 2008
Command line: ro root=/dev/vg09/lv90 console=ttyS0,115200
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffb0000 (usable)
BIOS-e820: 00000000dffbe000 - 00000000dffc0000 type 9
BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data)
BIOS-e820: 00000000dffce000 - 00000000e0000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
last_pfn = 0x420000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdffb0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dffb0000 page 4k
kernel direct mapping tables up to dffb0000 @ 8000-e000
last_map_addr: dffb0000 end: dffb0000
init_memory_mapping
0100000000 - 0420000000 page 2M
kernel direct mapping tables up to 420000000 @ c000-1e000
last_map_addr: 420000000 end: 420000000
RAMDISK: 37c80000 - 37fef38f
DMI present.
ACPI: RSDP 000FA9F0, 0024 (r2 HP )
ACPI: XSDT DFFC0100, 0084 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: FACP DFFC0290, 00F4 (r4 HP ProLiant 20080822 FOXC 97)
ACPI: DSDT DFFC0690, 4E1F (r2 HP ProLiant 12 INTL 20051117)
ACPI: FACS DFFCE000, 0040
ACPI: APIC DFFC0390, 009E (r2 HP ProLiant 20080822 FOXC 97)
ACPI: SPCR DFFC0430, 0050 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: MCFG DFFC0480, 003C (r1 HP ProLiant 20080822 FOXC 97)
ACPI: SPMI DFFC04C0, 0041 (r5 HP ProLiant 20080822 FOXC 97)
ACPI: OEMB DFFCE040, 0072 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: HPET DFFC54B0, 0038 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: SSDT DFFCF2C0, 1238 (r1 HP ProLiant 12 INTL 20051117)
ACPI: EINJ DFFC54F0, 0130 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: BERT DFFC5680, 0030 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: ERST DFFC56B0, 01B0 (r1 HP ProLiant 20080822 FOXC 97)
ACPI: HEST DFFC5860, 00A8 (r1 HP ProLiant 20080822 FOXC 97)
No NUMA configuration found
Faking a node at 0000000000000000-0000000420000000
Bootmem setup node 0 0000000000000000-0000000420000000
NODE_DATA [0000000000019000 - 000000000002dfff]
bootmap [0000000000100000 - 0000000000183fff] pages 84
(7 early reservations) ==> bootmem [0000000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00008b40ec] TEXT DATA BSS ==> [0000200000 - 00008b40ec]
#3 [0037c80000 - 0037fef38f] RAMDISK ==> [0037c80000 - 0037fef38f]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#6 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000]
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe2000e7fffff] PMD -> [ffff880028200000-ffff8800363fffff]
on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00420000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000dffb0
0: 0x00100000 -> 0x00420000
On node 0 totalpages: 4194127
DMA zone: 2109 pages, LIFO batch:0
DMA32 zone: 899048 pages, LIFO batch:31
Normal zone: 3232000 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
IOAPIC[1]: apic_id 10, version 0, address 0xfec89000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
PM: Registered nosave memory: 00000000dffb0000 - 00000000dffbe000
PM: Registered nosave memory: 00000000dffbe000 - 00000000dffc0000
PM: Registered nosave memory: 00000000dffc0000 - 00000000dffce000
PM: Registered nosave memory: 00000000dffce000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at f1000000 (gap: f0000000:ee00000)
PERCPU: Allocating 56224 bytes of per cpu data
NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4133157
Policy zone: Normal
Kernel command line: ro root=/dev/vg09/lv90 console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2659.997 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 16467784k/17301504k available (2762k kernel code, 308724k reserved,
1594k data, 1192k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency..
5319.99 BogoMIPS (lpj=2659997)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 20781209
Detected 20.781 MHz APIC timer.
Booting processor 1/4 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5201.16 BogoMIPS (lpj=2600580)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5506.68 BogoMIPS (lpj=2753341)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/5 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5133.14 BogoMIPS (lpj=2566570)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/5 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4/2 ip 6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5443.25 BogoMIPS (lpj=2721626)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 4/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5/6 ip 6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5426.44 BogoMIPS (lpj=2713220)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 5/6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU5: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6/3 ip 6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=2660006)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 6/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7/7 ip 6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5302.05 BogoMIPS (lpj=2651026)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 7/7 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (42652.73 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 0 2
domain 1: span 0-7 level CPU
groups: 0,2 1,3 4,6 5,7
domain 2: span 0-7 level NODE
groups: 0-7
CPU1 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 1 3
domain 1: span 0-7 level CPU
groups: 1,3 4,6 5,7 0,2
domain 2: span 0-7 level NODE
groups: 0-7
CPU2 attaching sched-domain:
domain 0: span 0,2 level MC
groups: 2 0
domain 1: span 0-7 level CPU
groups: 0,2 1,3 4,6 5,7
domain 2: span 0-7 level NODE
groups: 0-7
CPU3 attaching sched-domain:
domain 0: span 1,3 level MC
groups: 3 1
domain 1: span 0-7 level CPU
groups: 1,3 4,6 5,7 0,2
domain 2: span 0-7 level NODE
groups: 0-7
CPU4 attaching sched-domain:
domain 0: span 4,6 level MC
groups: 4 6
domain 1: span 0-7 level CPU
groups: 4,6 5,7 0,2 1,3
domain 2: span 0-7 level NODE
groups: 0-7
CPU5 attaching sched-domain:
domain 0: span 5,7 level MC
groups: 5 7
domain 1: span 0-7 level CPU
groups: 5,7 0,2 1,3 4,6
domain 2: span 0-7 level NODE
groups: 0-7
CPU6 attaching sched-domain:
domain 0: span 4,6 level MC
groups: 6 4
domain 1: span 0-7 level CPU
groups: 4,6 5,7 0,2 1,3
domain 2: span 0-7 level NODE
groups: 0-7
CPU7 attaching sched-domain:
domain 0: span 5,7 level MC
groups: 7 5
domain 1: span 0-7 level CPU
groups: 5,7 0,2 1,3 4,6
domain 2: span 0-7 level NODE
groups: 0-7
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 1:33:35 Date: 10/25/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [e080, e09f]
PCI: 0000:00:1d.1 reg 20 io port: [e000, e01f]
PCI: 0000:00:1d.2 reg 20 io port: [dc00, dc1f]
PCI: 0000:00:1d.3 reg 20 io port: [d880, d89f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdfff800, fdfffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
PCI: 0000:00:1f.2 reg 10 io port: [ec00, ec07]
PCI: 0000:00:1f.2 reg 14 io port: [e880, e883]
PCI: 0000:00:1f.2 reg 18 io port: [e800, e807]
PCI: 0000:00:1f.2 reg 1c io port: [e480, e483]
PCI: 0000:00:1f.2 reg 20 io port: [e400, e40f]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fdfffc00, fdffffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
PCI: bridge 0000:00:01.0 32bit mmio: [fcd00000, fdefffff]
pci 0000:0b:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:02.0: PME# disabled
pci 0000:0b:04.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:04.0: PME# disabled
PCI: bridge 0000:0a:00.0 32bit mmio: [fcd00000, fdefffff]
PCI: 0000:0d:00.0 reg 10 32bit mmio: [fdee0000, fdefffff]
PCI: 0000:0d:00.0 reg 14 32bit mmio: [fdc00000, fddfffff]
PCI: 0000:0d:00.0 reg 1c 32bit mmio: [fdedc000, fdedffff]
PCI: 0000:0d:00.1 reg 10 32bit mmio: [fdea0000, fdebffff]
PCI: 0000:0d:00.1 reg 14 32bit mmio: [fda00000, fdbfffff]
PCI: 0000:0d:00.1 reg 1c 32bit mmio: [fded8000, fdedbfff]
PCI: bridge 0000:0b:02.0 32bit mmio: [fd600000, fdefffff]
PCI: 0000:0c:00.0 reg 10 32bit mmio: [fd5e0000, fd5fffff]
PCI: 0000:0c:00.0 reg 14 32bit mmio: [fd200000, fd3fffff]
PCI: 0000:0c:00.0 reg 1c 32bit mmio: [fd5dc000, fd5dffff]
PCI: 0000:0c:00.1 reg 10 32bit mmio: [fd5a0000, fd5bffff]
PCI: 0000:0c:00.1 reg 14 32bit mmio: [fd000000, fd1fffff]
PCI: 0000:0c:00.1 reg 1c 32bit mmio: [fd5d8000, fd5dbfff]
PCI: bridge 0000:0b:04.0 32bit mmio: [fcd00000, fd5fffff]
PCI: 0000:09:00.0 reg 10 32bit mmio: [fcce0000, fccfffff]
PCI: 0000:09:00.0 reg 14 32bit mmio: [fcc80000, fccbffff]
PCI: 0000:09:00.0 reg 18 io port: [cc00, cc1f]
PCI: 0000:09:00.0 reg 1c 32bit mmio: [fccdc000, fccdffff]
pci 0000:09:00.0: PME# supported from D0 D3hot
pci 0000:09:00.0: PME# disabled
PCI: 0000:09:00.1 reg 10 32bit mmio: [fcc60000, fcc7ffff]
PCI: 0000:09:00.1 reg 14 32bit mmio: [fcc00000, fcc3ffff]
PCI: 0000:09:00.1 reg 18 io port: [c880, c89f]
PCI: 0000:09:00.1 reg 1c 32bit mmio: [fccd8000, fccdbfff]
pci 0000:09:00.1: PME# supported from D0 D3hot
pci 0000:09:00.1: PME# disabled
PCI: bridge 0000:00:05.0 io port: [c000, cfff]
PCI: bridge 0000:00:05.0 32bit mmio: [fcb00000, fccfffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:09.0. It can be enabled
forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:09.0 32bit mmio: [fca00000, fcafffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
PCI: 0000:02:00.0 reg 10 32bit mmio: [fa000000, faffffff]
PCI: 0000:02:00.0 reg 14 32bit mmio: [fc7fc000, fc7fffff]
PCI: 0000:02:00.0 reg 18 32bit mmio: [fb800000, fbffffff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [fc7e0000, fc7effff]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled
forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.0 32bit mmio: [fb700000, fc7fffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f9600000, fb5fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [fc8f0000, fc8fffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [fc800000, fc8fffff]
PCI: 0000:04:00.0 reg 10 64bit mmio: [fc9f0000, fc9fffff]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
PCI: bridge 0000:00:1c.2 32bit mmio: [fc900000, fc9fffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPES.SPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B8, should be
B7 [20080609]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 2
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:07: ioport range 0xa20-0xa9f has been reserved
system 00:07: ioport range 0xa00-0xa03 has been reserved
system 00:07: ioport range 0xa04-0xa05 has been reserved
system 00:07: ioport range 0xa18-0xa1f has been reserved
system 00:07: ioport range 0xa90-0xa9f has been reserved
system 00:08: ioport range 0x200-0x21f has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0xfed04000-0xfed1bfff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed44fff has been reserved
system 00:08: iomem range 0xfed45000-0xfed9ffff has been reserved
system 00:08: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:08: iomem range 0xfec01000-0xfec7ffff has been reserved
system 00:08: iomem range 0xfec80000-0xfec85fff has been reserved
system 00:08: iomem range 0xfec86000-0xfec8ffff has been reserved
system 00:08: iomem range 0xff000000-0xff3fffff has been reserved
system 00:08: iomem range 0xff400000-0xff7fffff has been reserved
system 00:08: iomem range 0xff800000-0xffbfffff could not be reserved
system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
pci 0000:0b:02.0: PCI bridge, secondary bus 0000:0d
pci 0000:0b:02.0: IO window: disabled
pci 0000:0b:02.0: MEM window: 0xfd600000-0xfdefffff
pci 0000:0b:02.0: PREFETCH window: disabled
pci 0000:0b:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:0b:04.0: IO window: disabled
pci 0000:0b:04.0: MEM window: 0xfcd00000-0xfd5fffff
pci 0000:0b:04.0: PREFETCH window: disabled
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: IO window: disabled
pci 0000:0a:00.0: MEM window: 0xfcd00000-0xfdefffff
pci 0000:0a:00.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfcd00000-0xfdefffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:09
pci 0000:00:05.0: IO window: 0xc000-0xcfff
pci 0000:00:05.0: MEM window: 0xfcb00000-0xfccfffff
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: disabled
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0: IO window: disabled
pci 0000:05:00.0: MEM window: disabled
pci 0000:05:00.0: PREFETCH window: disabled
pci 0000:05:00.3: PCI bridge, secondary bus 0000:08
pci 0000:05:00.3: IO window: disabled
pci 0000:05:00.3: MEM window: disabled
pci 0000:05:00.3: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: 0xfca00000-0xfcafffff
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xfb700000-0xfc7fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f9600000-0x000000fb5fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xfc800000-0xfc8fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xfc900000-0xfc9fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:00:01.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:0b:02.0: setting latency timer to 64
pci 0000:0b:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:00:09.0: setting latency timer to 64
pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:05:00.3: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 0a index 0 mmio: [0, 0]
bus: 0a index 1 mmio: [fcd00000, fdefffff]
bus: 0a index 2 mmio: [0, 0]
bus: 0a index 3 mmio: [0, 0]
bus: 0b index 0 mmio: [0, 0]
bus: 0b index 1 mmio: [fcd00000, fdefffff]
bus: 0b index 2 mmio: [0, 0]
bus: 0b index 3 mmio: [0, 0]
bus: 0d index 0 mmio: [0, 0]
bus: 0d index 1 mmio: [fd600000, fdefffff]
bus: 0d index 2 mmio: [0, 0]
bus: 0d index 3 mmio: [0, 0]
bus: 0c index 0 mmio: [0, 0]
bus: 0c index 1 mmio: [fcd00000, fd5fffff]
bus: 0c index 2 mmio: [0, 0]
bus: 0c index 3 mmio: [0, 0]
bus: 09 index 0 io port: [c000, cfff]
bus: 09 index 1 mmio: [fcb00000, fccfffff]
bus: 09 index 2 mmio: [0, 0]
bus: 09 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [fca00000, fcafffff]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [0, 0]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 mmio: [0, 0]
bus: 07 index 0 mmio: [0, 0]
bus: 07 index 1 mmio: [0, 0]
bus: 07 index 2 mmio: [0, 0]
bus: 07 index 3 mmio: [0, 0]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [fb700000, fc7fffff]
bus: 02 index 2 mmio: [f9600000, fb5fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [fc800000, fc8fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [fc900000, fc9fffff]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3516k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1224898413.823:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32170
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie01: allocate port service
pcieport-driver 0000:00:05.0: setting latency timer to 64
pcieport-driver 0000:00:05.0: found MSI capability
pci_express 0000:00:05.0:pcie00: allocate port service
pci_express 0000:00:05.0:pcie01: allocate port service
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: found MSI capability
pci_express 0000:00:09.0:pcie00: allocate port service
pci_express 0000:00:09.0:pcie01: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:0a:00.0: setting latency timer to 64
pci_express 0000:0a:00.0:pcie11: allocate port service
pci_express 0000:0a:00.0:pcie13: allocate port service
pcieport-driver 0000:0b:02.0: setting latency timer to 64
pcieport-driver 0000:0b:02.0: found MSI capability
pci_express 0000:0b:02.0:pcie21: allocate port service
pci_express 0000:0b:02.0:pcie23: allocate port service
pcieport-driver 0000:0b:04.0: setting latency timer to 64
pcieport-driver 0000:0b:04.0: found MSI capability
pci_express 0000:0b:04.0:pcie21: allocate port service
pci_express 0000:0b:04.0:pcie23: allocate port service
pcieport-driver 0000:05:00.0: setting latency timer to 64
pci_express 0000:05:00.0:pcie11: allocate port service
pcieport-driver 0000:06:00.0: setting latency timer to 64
pcieport-driver 0000:06:00.0: found MSI capability
pci_express 0000:06:00.0:pcie21: allocate port service
aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT DFFCE0C0, 0235 (r1 HP P001Ist 11 INTL 20051117)
processor ACPI0007:00: registered as cooling_device0
ACPI: SSDT DFFCE300, 0235 (r1 HP P002Ist 12 INTL 20051117)
processor ACPI0007:01: registered as cooling_device1
ACPI: SSDT DFFCE540, 0235 (r1 HP P003Ist 12 INTL 20051117)
processor ACPI0007:02: registered as cooling_device2
ACPI: SSDT DFFCE780, 0235 (r1 HP P004Ist 12 INTL 20051117)
processor ACPI0007:03: registered as cooling_device3
ACPI: SSDT DFFCE9C0, 0235 (r1 HP P005Ist 12 INTL 20051117)
processor ACPI0007:04: registered as cooling_device4
ACPI: SSDT DFFCEC00, 0235 (r1 HP P006Ist 12 INTL 20051117)
processor ACPI0007:05: registered as cooling_device5
ACPI: SSDT DFFCEE40, 0235 (r1 HP P007Ist 12 INTL 20051117)
processor ACPI0007:06: registered as cooling_device6
ACPI: SSDT DFFCF080, 0235 (r1 HP P008Ist 12 INTL 20051117)
processor ACPI0007:07: registered as cooling_device7
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Magic number: 12:36:560
Freeing unused kernel memory: 1192k freed
Write protecting the kernel read-only data: 4024k
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.1 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
input,hidraw0: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on
usb-0000:00:1d.0-1
input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
input,hidraw1: USB HID v1.11 Mouse [ServerEngines SE USB Device] on
usb-0000:00:1d.0-1
usb 2-1: New USB device found, idVendor=0000, idProduct=0000
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: SE USB Device
usb 2-1: Manufacturer: ServerEngines
usb 2-1: SerialNumber: 400648E15221F2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-M10N, 2.02, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-M10N 2.02 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATA-8: ST31000340NS, SN05, max UDMA/133
ata3.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata4.00: ATA-8: ST31000340NS, SN05, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: ATA-8: ST31000340NS, SN05, max UDMA/133
ata4.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
ata4.01: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 2:0:1:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 2:0:1:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4
sd 3:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:1:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5
sd 3:0:1:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:1:0: [sdd] Write Protect is off
sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:1:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:1:0: [sdd] Write Protect is off
sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdd: sdd1 sdd2 sdd3 sdd4
sd 3:0:1:0: [sdd] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [EMAIL PROTECTED]
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 40979
ext3_orphan_cleanup: deleting unreferenced inode 40978
ext3_orphan_cleanup: deleting unreferenced inode 40977
ext3_orphan_cleanup: deleting unreferenced inode 40976
ext3_orphan_cleanup: deleting unreferenced inode 40975
ext3_orphan_cleanup: deleting unreferenced inode 40974
ext3_orphan_cleanup: deleting unreferenced inode 40973
ext3_orphan_cleanup: deleting unreferenced inode 40972
ext3_orphan_cleanup: deleting unreferenced inode 40971
ext3_orphan_cleanup: deleting unreferenced inode 40970
ext3_orphan_cleanup: deleting unreferenced inode 40969
ext3_orphan_cleanup: deleting unreferenced inode 40968
ext3_orphan_cleanup: deleting unreferenced inode 40967
EXT3-fs: dm-0: 13 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1224898424.265:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /devices/platform/pcspkr/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
intel_rng: FWH not detected
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:1:0: Attached scsi generic sg4 type 0
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
EXT2-fs warning (device dm-3): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning (device dm-4): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning (device dm-5): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning (device dm-6): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Adding 2031608k swap on /dev/mapper/vg09-lv91. Priority:-1 extents:1
across:2031608k
dca service started, version 1.4
tg3.c:v3.94 (August 14, 2008)
tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:03:00.0: setting latency timer to 64
eth0: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express)
10/100/1000Base-T Ethernet 00:21:5a:d4:88:7e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:04:00.0: setting latency timer to 64
eth1: Tigon3 [partno(N/A) rev a200 PHY(5722/5756)] (PCI Express)
10/100/1000Base-T Ethernet 00:21:5a:d4:88:7f
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.31.5-lro
Copyright (c) 1999-2008 Intel Corporation.
ixgbe 0000:09:00.0: PCI INT B -> GSI 60 (level, low) -> IRQ 60
ixgbe 0000:09:00.0: setting latency timer to 64
ixgbe: 0000:09:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue
count = 8, Tx Queue count = 1
ixgbe: 0000:09:00.0: ixgbe_probe: (PCI Express:2.5Gb/s:Unknown)
00:1b:21:23:95:97
ixgbe: 0000:09:00.0: ixgbe_probe: PCI-Express bandwidth available for this card
is not sufficient for optimal performance.
ixgbe: 0000:09:00.0: ixgbe_probe: For optimal performance a x8 PCI-Express slot
is required.
ixgbe: eth2: ixgbe_probe: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:09:00.1: PCI INT A -> GSI 52 (level, low) -> IRQ 52
ixgbe 0000:09:00.1: setting latency timer to 64
ixgbe: 0000:09:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue
count = 8, Tx Queue count = 1
ixgbe: 0000:09:00.1: ixgbe_probe: (PCI Express:2.5Gb/s:Unknown)
00:1b:21:23:95:96
ixgbe: 0000:09:00.1: ixgbe_probe: PCI-Express bandwidth available for this card
is not sufficient for optimal performance.
ixgbe: 0000:09:00.1: ixgbe_probe: For optimal performance a x8 PCI-Express slot
is required.
ixgbe: eth3: ixgbe_probe: Intel(R) 10 Gigabit Network Connection
Intel(R) Gigabit Ethernet Network Driver - version 1.2.44.9
Copyright (c) 2007-2008 Intel Corporation.
igb 0000:0d:00.0: PCI INT A -> GSI 66 (level, low) -> IRQ 66
igb 0000:0d:00.0: setting latency timer to 64
igb: 0000:0d:00.0: igb_validate_option: Interrupt Mode set to 1
igb: eth4: igb_probe: Intel(R) Gigabit Ethernet Network Connection
igb: eth4: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:09:25:d0
igb: eth4: igb_probe: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
igb 0000:0d:00.1: PCI INT B -> GSI 62 (level, low) -> IRQ 62
igb 0000:0d:00.1: setting latency timer to 64
igb: 0000:0d:00.1: igb_validate_option: Interrupt Mode set to 1
igb: eth5: igb_probe: Intel(R) Gigabit Ethernet Network Connection
igb: eth5: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:09:25:d1
igb: eth5: igb_probe: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
igb 0000:0c:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
igb 0000:0c:00.0: setting latency timer to 64
igb: 0000:0c:00.0: igb_validate_option: Interrupt Mode set to 1
igb: eth6: igb_probe: Intel(R) Gigabit Ethernet Network Connection
igb: eth6: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:09:25:d4
igb: eth6: igb_probe: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
igb 0000:0c:00.1: PCI INT B -> GSI 58 (level, low) -> IRQ 58
igb 0000:0c:00.1: setting latency timer to 64
igb: 0000:0c:00.1: igb_validate_option: Interrupt Mode set to 1
igb: eth7: igb_probe: Intel(R) Gigabit Ethernet Network Connection
igb: eth7: igb_probe: (PCIe:2.5Gb/s:Width x4) 00:1b:21:09:25:d5
igb: eth7: igb_probe: Using MSI interrupts. 1 rx queue(s), 1 tx queue(s)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
tg3: eth1: Link is down.
ADDRCONF(NETDEV_UP): eth2: link is not ready
igb: eth4: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX
ADDRCONF(NETDEV_UP): eth4: link is not ready
ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
igb: eth5: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX
ADDRCONF(NETDEV_UP): eth5: link is not ready
ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
igb: eth6: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX
ADDRCONF(NETDEV_UP): eth6: link is not ready
ADDRCONF(NETDEV_CHANGE): eth6: link becomes ready
igb: eth7: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: RX
ADDRCONF(NETDEV_UP): eth7: link is not ready
ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
eth1: no IPv6 routers present
eth5: no IPv6 routers present
eth4: no IPv6 routers present
eth7: no IPv6 routers present
eth6: no IPv6 routers present
igb: eth4: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth5: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth6: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth7: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth4: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0x128/0x1c5()
NETDEV WATCHDOG: eth6 (igb): transmit timed out
Modules linked in: ipv6 igb ixgbe tg3 libphy ioatdma dca ext2 sg sr_mod
iTCO_wdt iTCO_vendor_support cdrom shpchp pcspkr dm_snapshot dm_zero dm_mirror
dm_log dm_mod ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbd
mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.27.1 #1
Call Trace:
<IRQ> [<ffffffff810392d1>] warn_slowpath+0xae/0xd7
[<ffffffff8113e365>] ? __next_cpu+0x19/0x26
[<ffffffff8102f875>] ? find_busiest_group+0x327/0x7d5
[<ffffffff8102ad99>] ? resched_task+0x2e/0x74
[<ffffffff81050a86>] ? sched_clock_cpu+0x10f/0x120
[<ffffffff810124c3>] ? read_tsc+0xe/0x24
[<ffffffff81051aab>] ? getnstimeofday+0x3a/0x96
[<ffffffff8123a2f1>] dev_watchdog+0x128/0x1c5
[<ffffffff81050b78>] ? sched_clock_tick+0x8f/0x98
[<ffffffff8123a1c9>] ? dev_watchdog+0x0/0x1c5
[<ffffffff81041e9d>] run_timer_softirq+0x197/0x218
[<ffffffff8103e4c7>] __do_softirq+0x74/0xea
[<ffffffff8100da0c>] call_softirq+0x1c/0x28
[<ffffffff8100ec0d>] do_softirq+0x44/0x8b
[<ffffffff8103e1e1>] irq_exit+0x3f/0x82
[<ffffffff8101bff8>] smp_apic_timer_interrupt+0x8f/0xa8
[<ffffffff8100d213>] apic_timer_interrupt+0x83/0x90
<EOI> [<ffffffff81012ed5>] ? mwait_idle+0x40/0x4c
[<ffffffff8100b126>] ? enter_idle+0x22/0x24
[<ffffffff8100b1cb>] ? cpu_idle+0xa3/0xeb
[<ffffffff8129a34d>] ? rest_init+0x61/0x63
---[ end trace b133a3a67e38de81 ]---
igb: eth5: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth6: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
igb: eth7: igb_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
