Hello, I'am using a computer where 2 ethernet devices with the PCI ID 109A are present I have compiled and installed the 0.4.1.12 version on a 2.4.24 Linux kernel. Modprobe works but generates the following output in dmesg
e1000e: Intel(R) PRO/1000 Network Driver - 0.4.1.12-NAPI e1000e: Copyright (c) 1999-2008 Intel Corporation. PCI: Setting latency timer of device 03:00.0 to 64 03:00.0: : Failed to initialize MSI interrupts. Falling back to legacy interrupts. 03:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0e:8c:9e:a7:a8 03:00.0: eth0: Intel(R) PRO/1000 Network Connection 03:00.0: eth0: MAC: 3, PHY: 2, PBA No: ffffff-0ff PCI: Setting latency timer of device 04:00.0 to 64 04:00.0: : Failed to initialize MSI interrupts. Falling back to legacy interrupts. 04:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:0e:8c:9e:a7:a7 04:00.0: eth1: Intel(R) PRO/1000 Network Connection 04:00.0: eth1: MAC: 3, PHY: 2, PBA No: ffffff-0ff ifconfig eth0 up works also but ifconfig eth0 192.168.200.1 netmask 255.255.255.0 never finishs Any ideas? Thanks for your help Reiner ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
