----------------------------------------
> Date: Mon, 16 Mar 2009 11:38:49 -0700
> From: jesse.brandeb...@intel.com
> To: pelle2...@hotmail.com
> CC: net...@vger.kernel.org; e1000-devel@lists.sourceforge.net
> Subject: Re: Intel 82567LM e1000e DHCP problem/question
>
> good idea to include e1000-devel@lists.sourceforge.net on these kinds of
> requests.
>
>
> On Sun, 15 Mar 2009, Pelle Svensson wrote:
>> Is there any functionality inside the driver for DHCP request.
>> I see in the source that there is some kind of DHCP filter f the tx stream.
>> Can the drive issue DHCP request inside it self when the Cable is
>> unplugged/plugged.
>
> short answer, the driver no, but the management firmware, maybe.
>
>> I'm tracing a DHCP fault.
>
> what kind of fault? Is the server faulting?
Yes the DHCP server cause the fault in a short answer.
In the long answer it depends on several things.
By the 2 kinds of request made by the client to the server,
it issued new IP adresses for each of the type of request rather frequently.
This ends up, after a while, with almost an idential faults as this bug.
https://bugzilla.redhat.com/show_bug.cgi?id=473658
>
>> When the net is brought down, ifdown eth0, the dhclient is killed.
>> Then when I unplugged/plugged the cable I get a DHCP request even that
>> dhclient is down.
>>
>> Also the Wireshark format of the DHCP request are different.
>> Correct request includes from dhclient has:
>>> Option: (t=12,l=5) Host Name = "pc005"
>> Incorrect requests when dhclient is killed does not have above.
>
> you apparently have the Intel AMT firmware (ME aka Management Engine)
> enabled in your BIOS, you can try to configure it by hitting CTRL-P during
> post (pre-boot) or at the prompt where it says to hit CTRL-P to enter
> system management setup.
>
> The ME (management engine) firmware is trying to acquire its own dhcp
> address and will do so if the driver is either not loaded or not up.
>
> Once the driver is loaded the firmware may still try to acquire a second
> dhcp address for the ME, depending on your configuration. This whole
> setup works a lot like IPMI, but generally the ME is not configurable via
> IPMI interfaces.
>
> Hope this helps,
> Jes
Your assumption about the Intel AMT seems right!
Log Tracking DHCP Request when plugged net cable in:
- Power on and load Fedora -> No DHCP Request from BIOS until Desktop up
- ifdown eth0 -> DHCP Request
- Restart Fedora -> DHCP Request during the hole Shutdown process
- Enter BIOS menu -> DHCP Request
- Boot up Fedora -> DHCP Request from BIOS until Desktop up
ifdown eth0 trigged the plugged net cable DHCP Request
I tried to hit Ctrl-P frequently during the boot process but it newer display
any
management setup. I'm running Fedora 10 on Lenovo T500 bios 1.20 (6FET50WW).
Only AMT stuff I can find for Lenovo is related to Vista or XP, But that seems
to
for the OS not the BIOS. Can I load the Windows stuff and turn the AMT DHCP
stuff off? I do have dual boot for XP on this PC.
/Thanks
Pelle
_________________________________________________________________
Dela foton på ett smidigt sätt med Windows Live™ Photos.
http://www.microsoft.com/windows/windowslive/products/photos.aspx
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
