Hi all, I need a help with following issue.
I have a board with six Ethernet cards (all e1000). Two of them are currently used (eth0, eth2). If I do "ifdown eth0" and then "ifup eth0" it lasts at least 30s (ping reports "destination host unreachable") until the card starts send/receive packets again. However, whole the time it is reported as "up". If I do the same with another Ethernet card eth2 the delay is significantly smaller. Hardware background: - ATCA platform - eth cards are Intel 82546 - eth0 is situated on expansion PMC board - eth2 is integrated (connected to backplane) Does anyone have any idea why eth0 is so delayed? Thanks a lot. Michal Filka ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
