(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface).
On Sun, 6 Dec 2009 13:04:20 GMT bugzilla-dae...@bugzilla.kernel.org wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=14748 > > Summary: e1000e NIC not working after reboot > Product: Drivers > Version: 2.5 > Kernel Version: 2.6.32 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: Network > AssignedTo: drivers_netw...@kernel-bugs.osdl.org > ReportedBy: maci...@freesco.pl > Regression: Yes > > > When I power up my system the NIC is working properly. > After every reboot the NIC is not working. I mean the eth0 is created, but > neither dhcpcd gets IP nor static setup helps > . > ifconfig eth0 shows zero packets on Rx and Tx (no errors, overrunns, etc.) > > logs after modprobing e1000e (NIC working OK): > Dec 6 12:29:28 mcxR kernel: e1000e: Intel(R) PRO/1000 Network Driver - > 1.0.2-k2 > Dec 6 12:29:28 mcxR kernel: e1000e: Copyright (c) 1999-2008 Intel > Corporation. > Dec 6 12:29:28 mcxR kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, > low) -> IRQ 20 > Dec 6 12:29:28 mcxR kernel: e1000e 0000:00:19.0: setting latency timer to 64 > Dec 6 12:29:28 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > Dec 6 12:29:28 mcxR kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width > x1) > 00:15:58:cc:0f:35 > Dec 6 12:29:28 mcxR kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network > Connection > Dec 6 12:29:28 mcxR kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: > ffffff-0ff > Dec 6 12:29:28 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > Dec 6 12:29:28 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > Dec 6 12:29:30 mcxR kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, > Flow Control: RX/TX > > > logs after rebooting system and modprobing e1000e (NIC not working): > Dec 6 11:57:46 mcxR kernel: e1000e: Intel(R) PRO/1000 Network Driver - > 1.0.2-k2 > Dec 6 11:57:46 mcxR kernel: e1000e: Copyright (c) 1999-2008 Intel > Corporation. > Dec 6 11:57:46 mcxR kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, > low) -> IRQ 20 > Dec 6 11:57:46 mcxR kernel: e1000e 0000:00:19.0: setting latency timer to 64 > Dec 6 11:57:46 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > Dec 6 11:57:46 mcxR kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width > x1) > 00:15:58:cc:0f:35 > Dec 6 11:57:46 mcxR kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network > Connection > Dec 6 11:57:46 mcxR kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: > ffffff-0ff > Dec 6 11:57:48 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > Dec 6 11:57:48 mcxR kernel: e1000e 0000:00:19.0: irq 30 for MSI/MSI-X > > > Additional info: > Software: > - distro: Arch Linux > - kernel version: 2.6.32 > - e1000e version: 1.0.2-k2 > > > Hardware: > - notebook: Lenovo ThinkPad R61 > - network card: Intel Gigabit > > # lspci -v > 00:19.0 Ethernet controller: Intel Corporation 82566MC Gigabit Network > Connection (rev 03) > Subsystem: Lenovo Device 20ba > Flags: bus master, fast devsel, latency 0, IRQ 11 > Memory at fe200000 (32-bit, non-prefetchable) [size=128K] > Memory at fe224000 (32-bit, non-prefetchable) [size=4K] > I/O ports at 1800 [size=32] > Capabilities: [c8] Power Management version 2 > Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Kernel modules: e1000e > > $ uname -a > Linux mcxR 2.6.32-ARCH #7 SMP PREEMPT Fri Dec 4 15:39:16 CET 2009 x86_64 > Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz GenuineIntel GNU/Linux > Thanks. You don't mention which previous kernel version worked OK. Was it 2.6.31? ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
