>-----Original Message----- >From: Nikola Ciprich [mailto:[email protected]] >Sent: Wednesday, October 13, 2010 10:23 PM >To: Linux kernel list; linux-net maillist; e1000-devel list >Cc: [email protected] >Subject: [E1000-devel] 2.6.36-rc7-git2 - panic/GPF: e1000e/vlans? > >Hi, >when I try to boot 2.6.36-rc7-git2 on one of my machines, it crashes while >setting up the network.
Thanks for letting us know! >The setup is quite complex, with bonding, lots of vlans and 3 intel >adapters (system is quad x86_64) Could you provide more details about the exact setup and the sequence of commands that lead to the crash? If you can narrow it down to the actual command that caused the crash that would be very helpful. Also - are you testing from Linus or net-next tree? If you are not using net-next, could you give it a try and see if you can reproduce it there? > >snip of lspci: >06:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet >Controller (Copper) (rev 01) >06:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet >Controller (Copper) (rev 01) >09:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network >Connection Could you provide the output of lspci -vvv and a kernel config? Thanks, Emil ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
