Hi John,
Apologies I've been travelling and just got your message. The system has 2
onboard Broadcom adapters running the tg3 driver as well as a PCI express 82576
Gigabit Quad adapter. The Broadcom adapters are unaffected by the issue and
remain operational.
Diagnostics before the issue: http://pastebin.ca/1962291
After the issue: http://pastebin.ca/1962898
I should mention that I've replicated the error on another two systems - both
of which have 2 onboard 82574L Intel adapters as well as the same quad card.
Please let me know if you need any further information.
Thanks,
Mark
On 15/10/2010 17:06, "Ronciak, John" <[email protected]> wrote:
The one now posted only show Broadcom Ethernet adapters. Try again. Also,
since you are using this site where are the older posts to it? The previous
ones aren't there.
Cheers,
John
From: Mark Liggett [mailto:[email protected]]
Sent: Friday, October 15, 2010 3:26 AM
To: Ronciak, John; Tantilov, Emil S; [email protected]
Subject: Re: F13 igb errors
Apologies John/Emil,
I should have read my email properly :)
I've posted the after at: http://pastebin.ca/1962898
Hope this helps.
Many thanks,
Mark
On 14/10/2010 18:43, "Ronciak, John" <[email protected]> wrote:
This looks like only the before stats. These are showing a problem. What about
after the test is run as Emil has asked for?
Cheers,
John
> -----Original Message-----
> From: Mark Liggett [mailto:[email protected]]
> Sent: Thursday, October 14, 2010 10:26 AM
> To: Tantilov, Emil S; [email protected]
> Subject: Re: [E1000-devel] F13 igb errors
>
>
>
>
> On 14/10/2010 18:09, "Tantilov, Emil S" <[email protected]>
> wrote:
>
> >-----Original Message-----
> >From: Mark Liggett [mailto:[email protected]]
> >Sent: Thursday, October 14, 2010 9:46 AM
> >To: [email protected]
> >Subject: [E1000-devel] F13 igb errors
> >
> >Hi everyone,
> >
> >I'm having issues running Fedora 13 with a quad port 82576 Intel
> adapter.
> >Communications stop with the card reporting huge numbers of
> >errors/dropped/overruns/frame collisions after a small amount of data
> has
> >been transferred (<100MB normally). I've replicated this behavior on
> 3
> >separate systems all using the same type of quad port adapter. I
> >noticed the issue with the stock Fedora igb driver 2.1.0-k2 so built
> >and installed the 2.3.4 stable version but it didn't appear to make
> any difference.
> >
> >I've posted relevant information at http://pastebin.ca/1962243
> >
> >kernel = 2.6.34.7-56.fc13.x86_64
> >igb = 2.3.4
> >ioatdma = 4.00
> >dca = 1.12.1
> >
> >Please come back to me if you've any suggestions or if you need
> anymore
> >information.
>
> Could you also post the following information?
> lspci -vvv
> ethtool -e eth2
> ethool -S eth2
> ethtool -d eth2
>
> Ideally before and after the issue occurs.
>
> >
> >Thanks,
> >
> >Mark
> >
>
> Thanks,
> Emil
>
> Thanks Emil,
>
> I've posted the information at: http://pastebin.ca/1962291
>
> Hope this helps.
>
> Really appreciate your help.
>
> Mark
>
>
>
------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
