Am 04.03.2011 um 01:45 schrieb Allan, Bruce W: >> >> -----Original Message----- >> From: Pieper, Jeffrey E [mailto:jeffrey.e.pie...@intel.com] >> Sent: Thursday, March 03, 2011 1:44 PM >> To: Brandeburg, Jesse; Wyborny, Carolyn >> Cc: e1000-devel@lists.sourceforge.net >> Subject: Re: [E1000-devel] Wake on ARP not working >> >> I can reproduce this on my SM w/ 82574 down. >> >> Jeff
Thanks for testing, Jeff! > The short answer is the driver should never have suggested (via ethtool) that > it supports Wake-on-ARP because it does not; i.e. it does not populate the > appropriate address tables in hardware, nor is there a way to do that yet. > I'll be submitting a patch that removes that option. Wake-on-ARP may be a > supported feature in the future, but will require changes to ethtool as well. A patch that adds real support for wake-on-ARP would be better, though. It could even be implemented without any changes to the ethtool interface by having the limitation of only supporting up to the first four configured IP addresses. Regards, Mathias ------------------------------------------------------------------------------ What You Don't Know About Data Connectivity CAN Hurt You This paper provides an overview of data connectivity, details its effect on application quality, and explores various alternative solutions. http://p.sf.net/sfu/progress-d2d _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
