On 06/06/2011 01:29 PM, Eric Dumazet wrote:
> Le lundi 06 juin 2011 à 21:15 +0100, Ben Hutchings a écrit :
>> On Mon, 2011-06-06 at 10:56 -0700, Ben Greear wrote:
>>> On 06/06/2011 10:49 AM, Brandeburg, Jesse wrote:
>>>>
>>>> <added netdev>, removed other useless lists.
>>>>
>>>> On Sat, 4 Jun 2011, Andrea Merello wrote:
>>>>> In e100 driver it seems that the intention was to accept bad frames in
>>>>> promiscuous mode and loopback mode.
>>>>> I think this is evident because of the following code in the driver:
>>>>>
>>>>> if (nic->flags& promiscuous || nic->loopback) {
>>>>> config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
>>>>> config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
>>>>> config->promiscuous_mode = 0x1; /* 1=on, 0=off */
>>>>> }
>>>>>
>>>>
>>>> Hi, thanks for your work on e100.
>>>>
>>>>> However this intention is not really realized because bad frames are
>>>>> discarded later by SW check.
>>>>> This patch finally honors the above intention, making the RX code to
>>>>> let bad frames to pass when the NIC is in promiscuous or loopback
>>>>> mode.
>>>>
>>>> I think this may be a mistake by the authors of the software developers
>>>> manual. The manual suggests that save bad frames and save short frames
>>>> should be enabled in promisc mode, but all of our other drivers *do not*
>>>> save bad frames when in promiscuous mode (by design). This is intentional
>>>> because a bad frame is just that, bad, and with no hope of knowing if the
>>>> data in it is okay/malicious/other. I understand your reasoning above,
>>>> but realistically the rx_save_bad_frames should NOT be set. I'd ack a
>>>> patch to comment that line out.
>>>>
>>>>> This helped me a lot to debug an FPGA ethernet core.
>>>>> Maybe it can be also useful to someone else..
>>>>
>>>> I think this patch is just that, debug only. As a developer I understand
>>>> why this is useful, but there is no reason any normal user would be able
>>>> to benefit from this, so for now, sorry:
>>>>
>>>> NACK.
>>>
>>> I think anyone sniffing a funky network would have benefit in
>>> receiving all frames. So, while it shouldn't be enabled by default,
>>> it would be nice to have an ethtool command to turn on receiving
>>> bad-crc frames, as well as receiving the 4-byte CRC on the end of
>>> the packets.
>>>
>>> It just so happens I have such a patch, in case others agree :)
>>
>> How would a received skb be flagged as having a CRC error?
>>
>
> maybe some skb->pkt_type = PACKET_INVALID; or something...
That looks good to me. pkt_type is passed up through some of the pf_socket
interfaces, so capture tools could easily be modified to pay attention to it.
We might also need to add a flag 'crc-included' so that tools could know
that the last 4 bytes of the packet are ethernet CRC, for NICs that support
that.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
