The type of filter you define below is a perfect filter. So if you are using that type you would want perfect filter mode.
You can enable perfect filter mode one of two ways. The first is to do it via the FdirMode module parameter, the second is to enable it via the command: ethtool -K ethX ntuple on. Thanks, Alex On 08/16/2011 06:48 PM, Jon Zhou wrote: > Hi > > When I create a flow director filter like below, should I set FdirMode = ATR > or perfect filter mode? Or just default > > "Ethtool -U eth5 flow-type udp4 vlan $vLanId vlan-mask 0xF000 action 1" > > Is it a kind of perfect filter or something else? > > > Thanks > jon > > ------------------------------------------------------------------------------ > Get a FREE DOWNLOAD! and learn more about uberSVN rich system, > user administration capabilities and model configuration. Take > the hassle out of deploying and managing Subversion and the > tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 > _______________________________________________ > E1000-devel mailing list > E1000-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/e1000-devel > To learn more about Intel® Ethernet, visit > http://communities.intel.com/community/wired ------------------------------------------------------------------------------ Get a FREE DOWNLOAD! and learn more about uberSVN rich system, user administration capabilities and model configuration. Take the hassle out of deploying and managing Subversion and the tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
