Hi,
I am using e1000e driver(version: 0.4.1.12-NAPI, firmware-version: 5.10-2)
. In dmesg I am seeing
0000:00:19.0: eth0: Detected Tx Unit Hang:
TDH <b7>
TDT <a3>
next_to_use <a3>
next_to_clean <b7>
buffer_info[next_to_clean]:
time_stamp <358fd1e>
next_to_watch <b7>
jiffies <3590670>
next_to_watch.status <0>
0000:00:19.0: eth0: Detected Tx Unit Hang:
TDH <b7>
TDT <a3>
next_to_use <a3>
next_to_clean <b7>
buffer_info[next_to_clean]:
time_stamp <358fd1e>
next_to_watch <b7>
jiffies <3590e40>
next_to_watch.status <0>
0000:00:19.0: eth0: Detected Tx Unit Hang:
TDH <b7>
TDT <a3>
next_to_use <a3>
next_to_clean <b7>
buffer_info[next_to_clean]:
time_stamp <358fd1e>
next_to_watch <b7>
jiffies <3591610>
next_to_watch.status <0>
0000:00:19.0: eth0: Detected Tx Unit Hang:
TDH <b7>
TDT <a3>
next_to_use <a3>
next_to_clean <b7>
buffer_info[next_to_clean]:
time_stamp <358fd1e>
next_to_watch <b7>
jiffies <3591de0>
next_to_watch.status <0>
NETDEV WATCHDOG: eth0: transmit timed out
0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
My Nic card is,
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
Can you please suggest me, how will I fix this issue.
Thanks,
Indira.
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2dcopy1
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
