Use the current logging styles.
pr_<level> conversions are now prefixed with "igb: "
Correct a defect where the trailing NTU may have been printed
on a separate line because of an interleaving hex_dump.
Remove unnecessary uses of KERN_CONT and use single pr_info()s
to avoid any possible output interleaving from other modules.
Coalesce formats as appropriate.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 155 +++++++++++++---------------
1 files changed, 72 insertions(+), 83 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
b/drivers/net/ethernet/intel/igb/igb_main.c
index 10670f9..37c0000 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -25,6 +25,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -65,7 +67,7 @@ char igb_driver_name[] = "igb";
char igb_driver_version[] = DRV_VERSION;
static const char igb_driver_string[] =
"Intel(R) Gigabit Ethernet Network Driver";
-static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel
Corporation.";
+static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel
Corporation";
static const struct e1000_info *igb_info_tbl[] = {
[board_82575] = &e1000_82575_info,
@@ -318,16 +320,14 @@ static void igb_regdump(struct e1000_hw *hw, struct
igb_reg_info *reginfo)
regs[n] = rd32(E1000_TXDCTL(n));
break;
default:
- printk(KERN_INFO "%-15s %08x\n",
+ pr_info("%-15s %08x\n",
reginfo->name, rd32(reginfo->ofs));
return;
}
snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
- printk(KERN_INFO "%-15s ", rname);
- for (n = 0; n < 4; n++)
- printk(KERN_CONT "%08x ", regs[n]);
- printk(KERN_CONT "\n");
+ pr_info("%-15s %08x %08x %08x %08x\n",
+ rname, regs[0], regs[1], regs[2], regs[3]);
}
/*
@@ -352,18 +352,17 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
- printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
- printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name,
- netdev->state,
- netdev->trans_start,
- netdev->last_rx);
+ pr_info("Device Name state trans_start
last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n",
+ netdev->name,
+ netdev->state,
+ netdev->trans_start,
+ netdev->last_rx);
}
/* Print Registers */
dev_info(&adapter->pdev->dev, "Register Dump\n");
- printk(KERN_INFO " Register Name Value\n");
+ pr_info(" Register Name Value\n");
for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
reginfo->name; reginfo++) {
igb_regdump(hw, reginfo);
@@ -374,18 +373,17 @@ static void igb_dump(struct igb_adapter *adapter)
goto exit;
dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
for (n = 0; n < adapter->num_tx_queues; n++) {
struct igb_tx_buffer *buffer_info;
tx_ring = adapter->tx_ring[n];
buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
- printk(KERN_INFO " %5d %5X %5X %016llX %04X %p %016llX\n",
- n, tx_ring->next_to_use, tx_ring->next_to_clean,
- (u64)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (u64)buffer_info->time_stamp);
+ pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
}
/* Print TX Rings */
@@ -407,36 +405,37 @@ static void igb_dump(struct igb_adapter *adapter)
for (n = 0; n < adapter->num_tx_queues; n++) {
tx_ring = adapter->tx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "T [desc] [address 63:0 ] "
- "[PlPOCIStDDM Ln] [bi->dma ] "
- "leng ntw timestamp bi->skb\n");
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln]
[bi->dma ] leng ntw timestamp bi->skb\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
struct igb_tx_buffer *buffer_info;
tx_desc = IGB_TX_DESC(tx_ring, i);
buffer_info = &tx_ring->tx_buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
- printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
- " %04X %p %016llX %p", i,
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ next_desc = " NTC/U";
+ else if (i == tx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == tx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ pr_info("T [0x%03X] %016llX %016llX %016llX"
+ " %04X %p %016llX %p%s\n",
+ i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(u64)buffer_info->time_stamp,
- buffer_info->skb);
- if (i == tx_ring->next_to_use &&
- i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC/U\n");
- else if (i == tx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "",
@@ -449,11 +448,11 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print RX Rings Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC]\n");
+ pr_info("Queue [NTU] [NTC]\n");
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO " %5d %5X %5X\n", n,
- rx_ring->next_to_use, rx_ring->next_to_clean);
+ pr_info(" %5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
}
/* Print RX Rings */
@@ -485,36 +484,41 @@ rx_ring_summary:
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "R [desc] [ PktBuf A0] "
- "[ HeadBuf DD] [bi->dma ] [bi->skb] "
- "<-- Adv Rx Read format\n");
- printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
- "[vl er S cks ln] ---------------- [bi->skb] "
- "<-- Adv Rx Write-Back format\n");
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD]
[bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln]
---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
struct igb_rx_buffer *buffer_info;
buffer_info = &rx_ring->rx_buffer_info[i];
rx_desc = IGB_RX_DESC(rx_ring, i);
u0 = (struct my_u0 *)rx_desc;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX ---------------- %p", i,
+ pr_info("%s[0x%03X] %016llX %016llX
---------------- %p%s\n",
+ "RWB", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
- buffer_info->skb);
+ buffer_info->skb, next_desc);
} else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %p", i,
+ pr_info("%s[0x%03X] %016llX %016llX %016llX
%p%s\n",
+ "R ", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
- buffer_info->skb);
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter)) {
print_hex_dump(KERN_INFO, "",
@@ -531,14 +535,6 @@ rx_ring_summary:
PAGE_SIZE/2, true);
}
}
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
}
}
@@ -592,10 +588,10 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
static int __init igb_init_module(void)
{
int ret;
- printk(KERN_INFO "%s - version %s\n",
+ pr_info("%s - version %s\n",
igb_driver_string, igb_driver_version);
- printk(KERN_INFO "%s\n", igb_copyright);
+ pr_info("%s\n", igb_copyright);
#ifdef CONFIG_IGB_DCA
dca_register_notify(&dca_notifier);
@@ -3676,23 +3672,19 @@ static void igb_watchdog_task(struct work_struct *work)
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
+ printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s
Duplex, Flow Control: %s\n",
netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) &&
- (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
+ "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_LINK_THROTTLE)) {
- printk(KERN_INFO "igb: %s The network adapter "
- "link speed was downshifted "
- "because it overheated.\n",
- netdev->name);
+ netdev_info(netdev, "The network adapter link
speed was downshifted because it overheated\n");
}
/* adjust timeout factor according to speed/duplex */
@@ -3723,10 +3715,7 @@ static void igb_watchdog_task(struct work_struct *work)
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_PWR_DOWN)) {
- printk(KERN_ERR "igb: %s The network adapter "
- "was stopped because it "
- "overheated.\n",
- netdev->name);
+ netdev_err(netdev, "The network adapter was
stopped because it overheated\n");
}
/* Links status message must follow this format */
--
1.7.6.405.gc1be0
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
