Hi all, PowerEdge 1950 + Intel PRO/1000 MT Dual Port (82546GB) + CentOS 5.7 = e1000 DON'T WORK!!
Broadcom NetXtreme II BCM5708 Gigabit Ethernet Work OK but intel don't ping and arp show incomplete at MAC address ---------------------- PowerEdge 1950 with new firmware, BCM & SAS PCI-X Slot1 Intel PRO/1000 MT Dual Port (82546GB) lspci -vvvv http://pastebin.com/81PV9t0C ifconfig -a http://pastebin.com/Ls0udgpB cat /proc/interrupts http://pastebin.com/sAYVQKAk cat /etc/modprobe.conf http://pastebin.com/STY3E4rC e1000-8.0.35.tar.gz http://sourceforge.net/projects/e1000/files/e1000%20stable/8.0.35/ modinfo e1000 http://pastebin.com/KsCbtsQh tcpdump -i eth3 http://pastebin.com/zmJiR1Fp arp Address HWtype HWaddress Flags Mask Iface 10.117.110.49 (incomplete) eth3 -------------------------------------------------------------------------------------------------------------------- from 10.117.110.49 send ping to 10.117.110.103 ~]# ping 10.117.110.103 PING 10.117.110.103 (10.117.110.103) 56(84) bytes of data. --- 10.117.110.103 ping statistics --- 15 packets transmitted, 0 received, 100% packet loss, time 13998ms arp at 10.117.110.49 show 10.117.110.103 ether 00:15:C5:E9:05:D5 C eth1 tcpdump -i eth1 http://pastebin.com/HpWiB81p any one known how to make work the Intel PRO/1000 MT Dual Port (82546GB) at PowerEdge 1950 running CentOS 5.7 ??? thanks, Carlos ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
