On 19 Mar 2012, at 17:31, Nix wrote: > On 19 Mar 2012, Carolyn Wyborny said: > >>> you'll see that I tested that, and it doesn't work :( even if it did >>> work, it shouldn't be needed: the driver attempts to turn off PCIe ASPM >>> on affected NICs, and fails, apparently because *something* turns it >>> back on again. >>> >> The driver attempts to disable L0s state, not the entire feature. It > > It tries to disable L1 state as well (or it did when I tested this last, > although I suspect you're right and it may leave L1 turned on these > days: judging by the contents of e1000_82574_info, anyway.) > >> is also required that the device upstream on the bus from the 82574L >> have this disabled. Yes, I agree there appears to be something in the >> os that either ren-enables or fails to disable the feature on the >> upstream device, as desired. Platforms/systems also appear to vary in >> this regard, so the solutions may vary a bit as well. >> >> Its worth trying your solution as well if what I suggested doesn't >> work, but there is not one solution that fits all, unfortunately. > > I don't *have* a solution. :( 'setpci by hand some unknown amount of > time after booting once the interface has stabilized' hardly counts as a > solution of any sort. It's, at best, a workaround that lets me use my > systems without hourly lockups until a real solution is found. > > (To clarify: manual setpci to force off the ASPM bits is the only thing > that works for me. The driver's automatic disabling of L0s and L1 > doesn't work: nor does booting with pcie_aspm=off. In both cases, I end > up with both L0s and L1 turned on, and a lockup some time later, unless > I setpci the bits off by hand.)
Well, with that setpci incantation run against the NIC and its upstream device to disable ASPM L1s (setpci -s <dev> CAP_EXP+10.b=40), everything has been working very well indeed. Is there something the e1000e driver could do to disable L1s as well as L0s if we know there's a problem with them for these devices? Adding Bjorn Helgaas and linux-pci to CCs to try to get the ball rolling some more, as this is crippling without the fixes. Cheers, Chris -- Chris Boot bo...@bootc.net ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
