> -----Original Message----- > From: Don Smith [mailto:[email protected]] > Sent: Wednesday, June 26, 2013 2:19 PM > To: Wyborny, Carolyn > Cc: Waskiewicz Jr, Peter P; [email protected] > Subject: Re: [E1000-devel] Problems using timestamps in igb driver with I350- > T2 adapter > > This turned out to be my problem with the experimental setup that did not > properly control the sending inter-frame times at the lower frame rates but > did at higher frame rates. Once I corrected the experiment I get almost > perfect timestamp results for all frames at all rates. > > I'm sorry to have bothered you about what turned out to be my mistake (but > you did help me a lot because you indicated there should not be a problem > with the timestamping, so I decided to look more carefully at how they were > being measured). > > Thank you very much. > > -- Don > > Hello,
Thanks for the update, we're happy you got it sorted out and happy to have helped at all. Thanks, Carolyn Carolyn Wyborny Linux Development Networking Division Intel Corporation ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
