On Wed, 2013-12-11 at 10:32 +0100, Stefan Assmann wrote: > For i350 VLAN stripping for VMs is not enabled in the VMOLR register > but in > the DVMOLR register. Making the changes accordingly. It's not > necessary to > unset the E1000_VMOLR_STRVLAN bit on i350 as the hardware will simply > ignore > it. > > Without this change if a VLAN is configured for a VF assigned to a > guest > via (i.e.) > ip link set p1p1 vf 0 vlan 10 > the VLAN tag will not be stripped from packets going into the VM. > Which they > should be because the VM itself is not aware of the VLAN at all. > > Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Sibai Li <[email protected]> Signed-off-by: Aaron Brown <[email protected]>
> --- > drivers/net/ethernet/intel/igb/e1000_82575.h | 4 ++++ > drivers/net/ethernet/intel/igb/e1000_regs.h | 1 + > drivers/net/ethernet/intel/igb/igb_main.c | 7 +++++++ > 3 files changed, 12 insertions(+) ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
