I think you need to ask the iPXE guys these questions, not us. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565
-----Original Message----- From: v...@selfip.ru [mailto:v...@selfip.ru] On Behalf Of Vasiliy Tolstov Sent: Wednesday, February 26, 2014 7:55 AM To: Fujinaka, Todd Cc: e1000-devel@lists.sourceforge.net Subject: Re: [E1000-devel] burn ipxe to card 2014-02-26 19:50 GMT+04:00 Fujinaka, Todd <todd.fujin...@intel.com>: > The PXE spec does not support IPv6. The only way you might be able to get > this going is with uEFI, and we don't do the uEFI drivers. You'll have to > contact the uEFI folks. Okay, but ipxe can use ipv6 slaac address when boots, is that possible to reflash my intel pxe code with ipxe and not burn it? -- Vasiliy Tolstov, e-mail: v.tols...@selfip.ru jabber: v...@selfip.ru ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
