Hi,
I started with a post on xen-users (Subject: Create domU with pciback
fails, then my system re-boots! xen-hypervisor-4.3-amd64) and was asked
there to post to xen-devel (Subject: xen-hypervisor-4.3-amd64
4.3.0-3+b1 -> Intel M/B, I/O virt. enabled, start vm -> Kernel panic).
xen-devel then asked me to raise the issue with the e1000 maintainers.
The problem
-----------
[1] Machine "green"
Intel S32000SHV motherboard
8 GB RAM
GenuineIntel Intel(R) Core(TM)2 Quad CPU
BIOS version S3200X38.86B.00.00.52
(Machine blue is the same hardware - I use them as a pair of DRBD
connected hosts. At the end of this mail I have listed the data
as suggested by lkml/reporting-bugs.html).
[2] xen and linux version on green:
dom0 is Debian Jessie:
Linux version 3.13-1-amd64 ([email protected]) \
(gcc version 4.8.2 (Debian 4.8.2-16) ) \
#1 SMP Debian 3.13.10-1 (2014-04-15)
xen-hypervisor-4.3-amd64 4.3.0-3+b1
xen-system-amd64 4.3.0-3+b1
xen-tools 4.4-1
xen-utils-4.3 4.3.0-3+b1
xen-utils-common 4.3.0-3
xenstore-utils 4.3.0-3+b1
system is up to date from Jessie as of Sat 17 May 16:58:01 BST 2014
[3] grub2 configured as:
GRUB_CMDLINE_XEN="dom0_mem=2G,max:2G dom0_max_vcpus=1 \
dom0_vcpus_pin vga=gfx-1280x1024x16 noreboot loglvl=all \
guest_loglvl=all com1=115200,8n1,0x3f8,4 console=com1,vga"
GRUB_CMDLINE_LINUX="console=hvc0 earlyprintk=xen"
null modem cable connected to screen session on my desktop PC.
[4] There are four ethernet devices fitted, and after the various udev
renaming of Ethernet interfaces these come out as being:
eth0 via-rhine 0000:04:00.0 assigned for zone LOC xenbr0
eth1 via-rhine 0000:04:01.0 assigned for zone DMZ (pci-passthrough)
eth2 e1000 0000:04:02.0 used for DBRB
eth3 e1000e 0000:01:00.0 planned for Windows client domU
[5] I have patched /etc/xen/scripts/block-drbd as per
http://lists.xen.org/archives/html/xen-devel/2014-02/msg01190.html
so there are two case statements modifed to be:
case $t in
drbd|phy)
drbd_resource=$p
drbd_role="$(/sbin/drbdadm role $drbd_resource)"
.
.
.
and
remove)
case $t in
drbd|phy)
p=$(xenstore_read "$XENBUS_PATH/params")
drbd_resource=$p
.
.
.
[6] Start test with the following BIOS options all disbaled:
Intel(R) Virtualization Technology
Intel(R) VT for Directed I/O
Multi-Thread Support In MPS table
Execute Disable Bit
Re-boot green from console, login via SSH from desktop machine.
~# xl pci-assignable-list
0000:01:00.0
0000:04:01.0
so these two cards are available for pci passthrough. DRBD is
working fine with machine "blue" (which is running wheezy and uses
xm).
On blue, shutdown vm-server-21 and when it has gone, start it on
machine green, this vm uses device 04:01.0.
The vm starts as expected and DRBD is happy.
~# xl list
Name ID Mem VCPUs State Time(s)
Domain-0 0 2046 1 r----- 18.4
vm-server-21 1 1020 1 -b---- 16.9
Shutdown this vm on green and re-start it on blue. Logout of SSH
session and re-start green from console. Go into BIOS and enable:
Intel(R) Virtualization Technology
Intel(R) VT for Directed I/O
login via SSH from desktop machine.
~# xl dmesg
contains
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) traps.c:3061: GPF (0000): ffff82c4c02772f8 -> ffff82c4c0218927
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation not enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
so I am hopeful that at some time I might get a windows domU
to run (yet "grep vmx /proc/cpuinfo" returns nothing, so maybe
it won't work). As before, the same two ethernet cards are
available via passthrough.
~# xl pci-assignable-list
0000:01:00.0
0000:04:01.0
If I now shutdown vm-server-21 on node blue, and re-start it green
~# xl -vvv create -c /etc/xen/vm-server-21.cfg
Parsing config from /etc/xen/vm-server-21.cfg
libxl: debug: libxl_create.c:1230:do_domain_create: ao 0x19671f0: create:
how=(nil) callback=(nil) poller=0x1966ba0
libxl: verbose: libxl_create.c:130:libxl__domain_build_info_setdefault:
qemu-xen is unavailable, use qemu-xen-traditional instead: No such file or
directory
.
.
.
libxl: debug: libxl_event.c:596:libxl__ev_xswatch_deregister: watch w=0x196fb78
wpath=/local/domain/0/backend/vbd/1/51712/state token=2/1: deregister slotnum=2
libxl: debug: libxl_event.c:608:libxl__ev_xswatch_deregister: watch
w=0x196fb78: deregister unregistered
libxl: debug: libxl_device.c:959:device_hotplug: calling hotplug script:
/etc/xen/scripts/block add
and it just sits here.
Serial console log for node green attached as
screenlog.0.serial_console_log.tgz. I understand from xen-devel
that the pertinent part of this is:
[....] Starting Xen daemons: xenfs xenstored xenconsoled
[ 485.048066] d-con vm-13-disk2: PingAck did not arrive in time.
[ 486.876191] e1000 0000:04:02.0 eth2: Detected Tx Unit Hang
[ 486.876191] Tx Queue <0>
[ 486.876191] TDH <a5>
[ 486.876191] TDT <b5>
[ 486.876191] next_to_use <b5>
[ 486.876191] next_to_clean <a5>
[ 486.876191] buffer_info[next_to_clean]
[ 486.876191] time_stamp <10000b439>
[ 486.876191] next_to_watch <a6>
[ 486.876191] jiffies <10000b67f>
[ 486.876191] next_to_watch.status <0>
[ 488.880201] e1000 0000:04:02.0 eth2: Detected Tx Unit Hang
If there is anything more I can add, please let me know and I'll
try my best to get more information.
Best regards,
Jo.
---------- Data as suggested by .../lkml/reporting-bugs.html -------
Processor details
=================
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
stepping : 10
microcode : 0xa0b
cpu MHz : 2660.054
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu de tsc msr pae mce cx8 apic sep mca cmov pat
clflush acpi mmx fxsr sse sse2 ss ht syscall lm
constant_tsc rep_good nopl pni monitor est ssse3 cx16
sse4_1 xsave hypervisor lahf_lm dtherm
bogomips : 5320.10
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
module information
==================
xen_blkback 26032 0 [permanent], Live 0xffffffffa0332000
xen_gntdev 17032 2 - Live 0xffffffffa032c000
xen_evtchn 12783 1 - Live 0xffffffffa0320000
xenfs 12687 1 - Live 0xffffffffa031b000
xen_privcmd 12868 3 xenfs, Live 0xffffffffa0327000
drbd 290108 12 - Live 0xffffffffa02d3000
lru_cache 13032 1 drbd, Live 0xffffffffa02ce000
crc32c 12656 1 - Live 0xffffffffa02c0000
libcrc32c 12426 1 drbd, Live 0xffffffffa02c9000
bridge 97006 0 - Live 0xffffffffa02a7000
stp 12437 1 bridge, Live 0xffffffffa02a2000
llc 12745 2 bridge,stp, Live 0xffffffffa028c000
loop 26609 0 - Live 0xffffffffa0296000
iTCO_wdt 12831 0 - Live 0xffffffffa0287000
iTCO_vendor_support 12649 1 iTCO_wdt, Live 0xffffffffa0291000
psmouse 86221 0 - Live 0xffffffffa0270000
i3200_edac 12503 0 - Live 0xffffffffa026b000
pcspkr 12595 0 - Live 0xffffffffa0252000
serio_raw 12849 0 - Live 0xffffffffa024d000
evdev 17445 4 - Live 0xffffffffa0265000
coretemp 12854 0 - Live 0xffffffffa019d000
i2c_i801 16965 0 - Live 0xffffffffa025f000
i2c_core 24092 1 i2c_i801, Live 0xffffffffa0230000
lpc_ich 20768 0 - Live 0xffffffffa0196000
mfd_core 12601 1 lpc_ich, Live 0xffffffffa022b000
edac_core 47369 1 i3200_edac, Live 0xffffffffa0240000
processor 28274 0 - Live 0xffffffffa0257000
thermal_sys 27525 1 processor, Live 0xffffffffa0238000
button 12944 0 - Live 0xffffffffa0144000
ext4 465511 2 - Live 0xffffffffa01b8000
crc16 12343 1 ext4, Live 0xffffffffa013f000
mbcache 13082 1 ext4, Live 0xffffffffa0092000
jbd2 82560 1 ext4, Live 0xffffffffa01a2000
dm_mod 89365 24 - Live 0xffffffffa0175000
sg 29972 0 - Live 0xffffffffa0136000
sd_mod 44346 3 - Live 0xffffffffa011c000
sr_mod 21898 0 - Live 0xffffffffa0111000
crc_t10dif 12431 1 sd_mod, Live 0xffffffffa00d3000
cdrom 39232 1 sr_mod, Live 0xffffffffa00c8000
crct10dif_common 12356 1 crc_t10dif, Live 0xffffffffa0042000
e1000e 195024 0 - Live 0xffffffffa00dd000
via_rhine 26769 0 - Live 0xffffffffa004d000
ata_generic 12490 0 - Live 0xffffffffa003d000
ata_piix 33592 2 - Live 0xffffffffa018c000
libata 168945 2 ata_generic,ata_piix, Live 0xffffffffa014a000
scsi_mod 182938 4 sg,sd_mod,sr_mod,libata, Live 0xffffffffa009a000
mii 12675 1 via_rhine, Live 0xffffffffa0065000
e1000 101959 0 - Live 0xffffffffa0078000
xen_pciback 41486 0 - Live 0xffffffffa006c000
floppy 60847 0 - Live 0xffffffffa0055000
ptp 17460 1 e1000e, Live 0xffffffffa0037000
pps_core 13129 1 ptp, Live 0xffffffffa0048000
ehci_pci 12472 0 - Live 0xffffffffa00d8000
uhci_hcd 30843 0 - Live 0xffffffffa002e000
ehci_hcd 48510 1 ehci_pci, Live 0xffffffffa0129000
usbcore 154175 3 ehci_pci,uhci_hcd,ehci_hcd, Live 0xffffffffa0007000
usb_common 12440 1 usbcore, Live 0xffffffffa0000000
Loaded driver and hardware information
=======================================
/proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00b2-00b2 : APEI ERST
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.2
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.2
01f0-01f7 : ata_piix
02f8-02ff : serial
0376-0376 : 0000:00:1f.2
0376-0376 : ata_piix
03f2-03f2 : floppy
03f4-03f5 : floppy
03f6-03f6 : 0000:00:1f.2
03f6-03f6 : ata_piix
03f7-03f7 : floppy
03f8-03ff : serial
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0410-0415 : ACPI CPU throttle
0420-042f : ACPI GPE0_BLK
0430-0433 : iTCO_wdt
0460-047f : iTCO_wdt
0500-053f : gpio_ich
0500-053f : 0000:00:1f.0
0500-053f : pnp 00:05
0600-061f : pnp 00:05
0680-06ff : pnp 00:05
0800-087f : pnp 00:05
0848-084f : ACPI GPE1_BLK
0ca0-0caf : pnp 00:05
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
1000-1fff : PCI Bus 0000:04
1000-10ff : 0000:04:01.0
1400-14ff : 0000:04:00.0
1400-14ff : via-rhine
1800-183f : 0000:04:02.0
1800-183f : e1000
2000-2fff : PCI Bus 0000:01
2000-201f : 0000:01:00.0
3000-301f : 0000:00:1f.3
3000-301f : i801_smbus
3020-303f : 0000:00:1d.2
3020-303f : uhci_hcd
3040-305f : 0000:00:1d.1
3040-305f : uhci_hcd
3060-307f : 0000:00:1d.0
3060-307f : uhci_hcd
3080-309f : 0000:00:1a.1
3080-309f : uhci_hcd
30a0-30bf : 0000:00:1a.0
30a0-30bf : uhci_hcd
30c0-30cf : 0000:00:1f.5
30c0-30cf : ata_piix
30d0-30df : 0000:00:1f.5
30d0-30df : ata_piix
30e0-30ef : 0000:00:1f.2
30e0-30ef : ata_piix
30f0-30ff : 0000:00:1f.2
30f0-30ff : ata_piix
3400-3407 : 0000:00:1f.5
3400-3407 : ata_piix
3408-340f : 0000:00:1f.5
3408-340f : ata_piix
3420-3423 : 0000:00:1f.5
3420-3423 : ata_piix
3424-3427 : 0000:00:1f.5
3424-3427 : ata_piix
4000-4fff : PCI Bus 0000:02
5000-5fff : PCI Bus 0000:03
/proc/iomem
00000000-00000fff : reserved
00001000-0009efff : System RAM
0009f000-0009fbff : RAM buffer
0009fc00-000fffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000c7fff : Video ROM
000c8000-000c8fff : Adapter ROM
000c9000-000c9fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-80060fff : System RAM
01000000-014b2e36 : Kernel code
014b2e37-018ad57f : Kernel data
019ab000-01a98fff : Kernel bss
80061000-dfbe7fff : Unusable memory
dfbe8000-dfc93fff : ACPI Non-volatile Storage
dfc94000-dfcf9fff : Unusable memory
dfcfa000-dfd5efff : reserved
dfd26010-dfd2605f : APEI ERST
dfd26068-dfd2606f : APEI ERST
dfd26070-dfd2800f : APEI ERST
dfd5f000-dfd68fff : Unusable memory
dfd69000-dfddefff : ACPI Non-volatile Storage
dfddf000-dfde5fff : Unusable memory
dfde6000-dfdfefff : ACPI Tables
dfdff000-dfdfffff : Unusable memory
dfe00000-dfefffff : reserved
e0000000-f3ffffff : reserved
e0000000-f0000000 : PCI Bus 0000:00
e0000000-e0ffffff : PCI Bus 0000:03
e0000000-e0ffffff : 0000:03:00.0
e0000000-e027ffff : BOOTFB
e1000000-e18fffff : PCI Bus 0000:03
e1000000-e17fffff : 0000:03:00.0
e1800000-e1803fff : 0000:03:00.0
e1810000-e181ffff : 0000:03:00.0
e1900000-e19fffff : PCI Bus 0000:04
e1900000-e191ffff : 0000:04:02.0
e1900000-e191ffff : e1000
e1920000-e193ffff : 0000:04:02.0
e1920000-e193ffff : e1000
e1940000-e19400ff : 0000:04:01.0
e1940100-e19401ff : 0000:04:00.0
e1940100-e19401ff : via-rhine
e1a00000-e1afffff : PCI Bus 0000:01
e1a00000-e1a7ffff : 0000:01:00.0
e1a80000-e1a9ffff : 0000:01:00.0
e1aa0000-e1aa3fff : 0000:01:00.0
e1b00000-e1b003ff : 0000:00:1d.7
e1b00000-e1b003ff : ehci_hcd
e1b00400-e1b007ff : 0000:00:1a.7
e1b00400-e1b007ff : ehci_hcd
e1b00800-e1b008ff : 0000:00:1f.3
f8000000-febfffff : PCI Bus 0000:00
f8000000-f80fffff : PCI Bus 0000:01
f8000000-f803ffff : 0000:01:00.0
f8100000-f82fffff : PCI Bus 0000:02
f8300000-f84fffff : PCI Bus 0000:02
f8500000-f85fffff : PCI Bus 0000:04
f8500000-f851ffff : 0000:04:02.0
f8520000-f852ffff : 0000:04:00.0
f8530000-f853ffff : 0000:04:01.0
feb00000-feb03fff : pnp 00:00
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed14000-fed17fff : pnp 00:00
fed18000-fed18fff : pnp 00:00
fed19000-fed19fff : pnp 00:00
fed1c000-fed1ffff : pnp 00:00
fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:00
fed45000-fed99fff : pnp 00:00
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fff80000-fff8bfff : reserved
100000000-21fffffff : Unusable memory
PCI information
===============
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
Subsystem: Intel Corporation Device 34d0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: i3200_edac
00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI
Express Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e1a00000-e1afffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device 0000
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41d0
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #0, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-,
OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 30a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 3080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 17
Region 0: Memory at e1b00400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8100000-f82fffff
Prefetchable memory behind bridge: 00000000f8300000-00000000f84fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 41d8
Capabilities: [90] Subsystem: Intel Corporation Optiplex 755
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e1000000-e18fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4121
Capabilities: [90] Subsystem: Intel Corporation 82801I (ICH9 Family)
PCI Express Port 5
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3060 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3020 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 34d0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e1b00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e1900000-e19fffff
Prefetchable memory behind bridge: 00000000f8500000-00000000f85fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Intel Corporation Device 34d0
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller
(rev 02)
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port
SATA Controller [IDE mode] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 30f0 [size=16]
Region 5: I/O ports at 30e0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at e1b00800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA
Controller [IDE mode] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 3408 [size=8]
Region 1: I/O ports at 3424 [size=4]
Region 2: I/O ports at 3400 [size=8]
Region 3: I/O ports at 3420 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: I/O ports at 30c0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Subsystem: Intel Corporation Gigabit CT Desktop Adapter
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1a80000 (32-bit, non-prefetchable) [disabled]
[size=128K]
Region 1: Memory at e1a00000 (32-bit, non-prefetchable) [disabled]
[size=512K]
Region 2: I/O ports at 2000 [disabled] [size=32]
Region 3: Memory at e1aa0000 (32-bit, non-prefetchable) [disabled]
[size=16K]
Expansion ROM at f8000000 [disabled] [size=256K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable- Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 68-05-ca-ff-ff-20-dc-1e
Kernel driver in use: pciback
03:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 0101
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at e1800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at e1000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e1810000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
04:00.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III]
(rev 86)
Subsystem: D-Link System Inc DFE-530TX rev C
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at e1940100 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f8520000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
04:01.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III]
(rev 86)
Subsystem: D-Link System Inc DFE-530TX rev C
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1000 [disabled] [size=256]
Region 1: Memory at e1940000 (32-bit, non-prefetchable) [disabled]
[size=256]
Expansion ROM at f8530000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
04:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05)
Subsystem: Intel Corporation Device 34d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e1920000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e1900000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 1800 [size=64]
Expansion ROM at f8500000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: e1000
[END]
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
