Before: ifup eth0 ethtool -A eth0 autoneg off rx on ethtool -a eth0 # rx on, as expected ifconfig eth0 up sleep 5 ethtool -a eth0 # rx off, not expected
After: rx on with iface up, as expected Signed-off-by: David Decotigny <[email protected]> --- drivers/net/ethernet/intel/e1000e/mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index 8c386f3a..ef014ae 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -1048,7 +1048,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * has completed, and if so, how the PHY and link partner has * flow control configured. */ - if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { + if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg && + hw->adapter->fc_autoneg) { /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits. @@ -1191,7 +1192,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * flow control configured. */ if ((hw->phy.media_type == e1000_media_type_internal_serdes) && - mac->autoneg) { + mac->autoneg && hw->adapter->fc_autoneg) { /* Read the PCS_LSTS and check to see if AutoNeg * has completed. */ -- 2.0.0.526.g5318336 ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
