Please post to the e1000-devel mailing list (on sourceforge).
Unfortunately, no, you’ll just have to follow the pointers using the data sheet.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com
(503) 712-4565
From: Pankaj Biswas [mailto:pankajc...@gmail.com]
Sent: Monday, September 29, 2014 11:18 PM
To: Fujinaka, Todd
Subject: Re: how to read eeprom dump for e1000e, igb and ixgbe?
hi Todd,
Sorry for the late answer. It is not an customer issue, so I am not sure if
filling a bug will help here. I have a local setup for 82599 Ethernet
Controller and interested to learn the NIC debugging. I am keen to learn the
n/w driver development too. Can you help?
thanks,
pankaj
On Thu, Sep 11, 2014 at 8:22 PM, Fujinaka, Todd
<todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>> wrote:
I would suggest either going through your customer representative for detailed
help, or filing a bug on sourceforge and posting your images.
Why are you looking at the images? Do you have a specific question regarding
the settings?
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>
(503) 712-4565
From: Pankaj Biswas [mailto:pankajc...@gmail.com<mailto:pankajc...@gmail.com>]
Sent: Wednesday, September 10, 2014 9:06 PM
To: Fujinaka, Todd
Subject: Re: how to read eeprom dump for e1000e, igb and ixgbe?
Yes Todd,
You are absolutely right. To be more specific I am currently trying it for
82599 Ethernet Controller (ixgbe driver).
-Pankaj
On Wed, Sep 10, 2014 at 9:33 PM, Fujinaka, Todd
<todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>> wrote:
I think you’re stuck looking at a dump and the data sheet.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>
(503) 712-4565
From: Pankaj Biswas [mailto:pankajc...@gmail.com<mailto:pankajc...@gmail.com>]
Sent: Wednesday, September 10, 2014 2:45 AM
To: Fujinaka, Todd
Subject: how to read eeprom dump for e1000e, igb and ixgbe?
hi Todd,
Can you share some utility which helps to read eeprom dump? I know one needs to
go through the driver spec. for this. But any way to crack this would be
helpful.
Thanks in Advance,
-Pankaj
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
