Hi Todd,
Please find attached the kernel config file.
The kernel has come from http://elrepo.org/tiki/kernel-lt
Regards,
Madhur
-----Original Message-----
From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
Sent: 15 October 2014 01:45
To: Fujinaka, Todd; Madhur Sethi; 'e1000-devel@lists.sourceforge.net'
Subject: RE: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
We can't reproduce this locally. We're thinking it might be your kernel config
so you'll need to send that to us, or tell us where your kernel is from.
Thanks.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com
(503) 712-4565
-----Original Message-----
From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
Sent: Monday, October 06, 2014 10:31 AM
To: Madhur Sethi; 'e1000-devel@lists.sourceforge.net'
Subject: Re: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
I've submitted this for local reproduction. We don't directly support CentOS,
so can you also try this with a kernel version that's closer to Red Hat's or
with the latest stable upstream kernel?
Thanks.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com
(503) 712-4565
From: Madhur Sethi [mailto:mad...@attivonetworks.com]
Sent: Friday, October 03, 2014 10:44 PM
To: Fujinaka, Todd; 'e1000-devel@lists.sourceforge.net'
Subject: RE: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
Hi Todd,
Please find below the details of KVM and OVS
[root@XXX ~]# rpm -qa | grep openvswitch
openvswitch-2.0.1-1.x86_64
[root@XXX ~]# rpm -qa | grep kvm
qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64
[root@XXX ~]# modinfo kvm_intel
filename:
/lib/modules/3.10.51-1.el6.elrepo.x86_64/kernel/arch/x86/kvm/kvm-intel.ko
license: GPL
author: Qumranet
srcversion: D1C0A8B692E68C9FAFD837D
alias: x86cpu:vendor:*:family:*:model:*:feature:*0085*
depends: kvm
intree: Y
vermagic: 3.10.51-1.el6.elrepo.x86_64 SMP mod_unload modversions
parm: vpid:bool
parm: flexpriority:bool
parm: ept:bool
parm: unrestricted_guest:bool
parm: eptad:bool
parm: emulate_invalid_guest_state:bool
parm: vmm_exclusive:bool
parm: fasteoi:bool
parm: enable_apicv:bool
parm: enable_shadow_vmcs:bool
parm: nested:bool
parm: ple_gap:int
parm: ple_window:int
Regards,
Madhur
From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
Sent: 04 October 2014 02:33
To: Madhur Sethi; 'e1000-devel@lists.sourceforge.net'
Subject: RE: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
Can you also tell us the version numbers for your Xen/KVM and OVS?
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>
(503) 712-4565
From: Madhur Sethi [mailto:mad...@attivonetworks.com]
Sent: Friday, October 03, 2014 12:09 PM
To: Fujinaka, Todd; 'e1000-devel@lists.sourceforge.net'
Subject: RE: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
Hi Todd,
Please find below the details of the configuration.
openVSwitch config:
[root@XXX ~]# ovs-vsctl show
3c55434d-c453-49e9-884d-e4fd6d614606
Bridge OVS-VlanBridge
Port OVS-VlanBridge
Interface OVS-VlanBridge
type: internal
Port "vnet366"
tag: 5
Interface "vnet366"
Port "eth1"
trunks: [5]
Interface "eth1"
The Vlan is intended to be stripped on the OVS-VlanBridge, as we don't want to
trunk it to the VM.
The vnet366 is configured as an access port on the openVSwitch and corresponds
to eth1 on the VM. On the VM the configuration is :
[root@YYY ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=Ethernet
BOOTPROTO=static
ONBOOT=yes
IPADDR=2.2.2.2
NETMASK=255.255.255.0
The physical Ethernet Port eth1 has the following configuration on the host :
DEVICE=eth1
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
The OVS successfully configures the VLAN and arp requests going out of eth1 to
the network are tagged with VLAN 5. However it does not pick up the arp
responses coming back from the other side.
Let me know if any more details are needed.
Regards,
Madhur
-----Original Message-----
From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
Sent: 03 October 2014 21:54
To: Madhur Sethi; 'e1000-devel@lists.sourceforge.net'
Subject: RE: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged
packets when using with openvswitch
There aren't enough details here. Can you tell us the exact steps you used for
configuring the VLANs on the host and guest?
Thanks.
Todd Fujinaka
Software Application Engineer
Networking Division (ND)
Intel Corporation
todd.fujin...@intel.com<mailto:todd.fujin...@intel.com>
(503) 712-4565
-----Original Message-----
From: Madhur Sethi [mailto:mad...@attivonetworks.com]
Sent: Friday, October 03, 2014 5:12 AM
To: 'e1000-devel@lists.sourceforge.net'
Subject: [E1000-devel] igb 5.0.3-k driver doesnt pick up vlan tagged packets
when using with openvswitch
Hey Guys,
It seems there is an issue with the igb drivers not being able to receive VLAN
tagged traffic when used with openvswitch.
I am on Centos 6.5 with the following kernel:
3.10.51-1.el6.elrepo.x86_64
I have the following intel driver in my setup.
[root@XXX ~]# ethtool -i eth1
driver: igb
version: 5.0.3-k
firmware-version: 1.80, 0x00000000
bus-info: 0000:05:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
[root@XXX ~]# lspci | grep Ethernet
02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
02:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
02:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
02:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
(rev 01)
I use eth1 on the DOM-0 for physical connectivity to my vm via openvswitch
and an ip address is configured on the vm. When I try to ping another machine
in the same network with vlan 5 , it seems that the arps are going out but the
nic doesn't pick up the returning arps even though the other end is duly
replying to the arps.
[root@XXX ~]# tcpdump -i eth1 -ne arp
tcpdump: WARNING: eth1: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes
16:30:13.035965 52:54:00:3c:77:f5 > Broadcast, ethertype 802.1Q (0x8100),
length 46: vlan 5, p 0, ethertype ARP, Request who-has 2.2.2.2 tell 2.2.2.3,
length 28
16:30:14.038195 52:54:00:3c:77:f5 > Broadcast, ethertype 802.1Q (0x8100),
length 46: vlan 5, p 0, ethertype ARP, Request who-has 2.2.2.2 tell 2.2.2.3,
length 28
I can see the arps being responded to on the other end. Can you guys help with
this?
Regards,
Madhur
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
