How are you configuring the NIC to do this? Are you using a tool or modifying the source code directly? Also, what driver are you using, what kernel version?
- Greg > -----Original Message----- > From: Trevor Highland [mailto:trevor.highl...@gmail.com] > Sent: Thursday, August 20, 2015 2:59 PM > To: e1000-devel@lists.sourceforge.net > Subject: [E1000-devel] i40e RSS configuration > > I am looking to configure an X710 NIC to perform the RSS hashing using > only the src/dst IP address for all types of IPv4 traffic. When I set the > RSS configuration to hash on I40E_FILTER_PCTYPE_FRAG_IPV4 and > I40E_FILTER_PCTYPE_NONF_IPV4_OTHER, non fragmented IPv4 TCP packets are > always hashed to queue 0. What are the appropriate settings to hash IPv4 > TCP packets only using the IP addresses as input? It isn't clear from the > datasheet what the appropriate settings should be, but this configuration > has been available to ixgbe and igb NICs. > > Trevor ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
