The 82551L has been EOLed for about nine years by my estimation. We don't have any further support for it.
Also, it is probably a violation of the GPL to start with the Linux driver to work on the QNX driver. I would suggest trying the FreeBSD driver. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Желобанов Дмитрий Владимирович [mailto:zheloba...@prosoftsystems.ru] Sent: Tuesday, September 15, 2015 5:15 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] Intel 82551IL chips Hello, We use chips 82551IL (did 0x1209 rev 0x10) in our embedded platforms. Our devices run QNX operation system. We faced with an issue: sometimes our devices don't receive Ethernet packets right after boot at all, only reboot helps to revive the devices. We think the root problem is in hardware-software communication with the Ethernet controller, or rather in QNX Ethernet driver. I looked in Linux driver (e100.c) and found, the driver uploads special firmware in chips like ours. So, could you give us a document which clarifies changes in d102e_ucode.bin firmware from the original on chip microcode? Желобанов Д.В. ООО <Прософт-Системы>, г. Екатеринбург. ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
