Hi,

 

I'm having the same problem as Kristian is with his igb link issue.  I also
have a different machine with an i210 card in it, that also has the same
issue on Linux ONLY.  FreeBSD works fine.

It's about 40% chance on boot that the issue will happen (but I did find a
workaround).  I believe it's something to do with auto-negotiation code.  I
can either unplug/replug the cable and it will come back up, or I can force
the link speed/duplex and it will bring the link back up when the issue is
triggered.

 

Ethtool on a boot with issue:

 

root@moffat-gw / # ethtool eth0

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Supported pause frame use: Symmetric

        Supports auto-negotiation: Yes

        Advertised link modes:  10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Advertised pause frame use: Symmetric

        Advertised auto-negotiation: Yes

        Speed: Unknown!

        Duplex: Unknown! (255)

        Port: Twisted Pair

        PHYAD: 0

        Transceiver: internal

        Auto-negotiation: on

        MDI-X: off (auto)

        Supports Wake-on: pumbg

        Wake-on: g

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: no

root@moffat-gw / # ethtool -s eth0 speed 1000 duplex full

root@moffat-gw / # ethtool eth0[   59.285152] igb 0000:00:14.0 eth0: igb:
eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

[   59.295788] br-lan: port 1(eth0) entered forwarding state

[   59.302438] br-lan: port 1(eth0) entered forwarding state

[   59.309274] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

 

Settings for eth0:

        Supported ports: [ TP ]

        Supported link modes:   10baseT/Half 10baseT/Full 

                                100baseT/Half 100baseT/Full 

                                1000baseT/Full 

        Supported pause frame use: Symmetric

        Supports auto-negotiation: Yes

        Advertised link modes:  1000baseT/Full 

        Advertised pause frame use: Symmetric

        Advertised auto-negotiation: Yes

        Speed: 1000Mb/s

        Duplex: Full

        Port: Twisted Pair

        PHYAD: 0

        Transceiver: internal

        Auto-negotiation: on

        MDI-X: off (auto)

        Supports Wake-on: pumbg

        Wake-on: g

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: yes

root@moffat-gw / #  ethtool -i eth0

driver: igb

version: 5.3.3.5

firmware-version: 0.0.0

expansion-rom-version: 

bus-info: 0000:00:14.0

supports-statistics: yes

supports-test: yes

supports-eeprom-access: yes

supports-register-dump: yes

supports-priv-flags: no

root@moffat-gw / # uname -a

Linux moffat-gw 4.1.15 #12 SMP Sun Jan 10 22:09:02 EST 2016 x86_64 GNU/Linux

root@moffat-gw / # ethtool -S  eth0

NIC statistics:

     rx_packets: 12463

     tx_packets: 9238

     rx_bytes: 2548091

     tx_bytes: 1699471

     rx_broadcast: 191

     tx_broadcast: 6

     rx_multicast: 3073

     tx_multicast: 91

     multicast: 3073

     collisions: 0

     rx_crc_errors: 0

     rx_no_buffer_count: 0

     rx_missed_errors: 0

     tx_aborted_errors: 0

     tx_carrier_errors: 0

     tx_window_errors: 0

     tx_abort_late_coll: 0

     tx_deferred_ok: 0

     tx_single_coll_ok: 0

     tx_multi_coll_ok: 0

     tx_timeout_count: 0

     rx_long_length_errors: 0

     rx_short_length_errors: 0

     rx_align_errors: 0

     tx_tcp_seg_good: 0

     tx_tcp_seg_failed: 0

     rx_flow_control_xon: 0

     rx_flow_control_xoff: 0

     tx_flow_control_xon: 0

     tx_flow_control_xoff: 0

     rx_long_byte_count: 2548091

     tx_dma_out_of_sync: 0

     lro_aggregated: 0

     lro_flushed: 0

     tx_smbus: 3068

     rx_smbus: 3106

     dropped_smbus: 0

     os2bmc_rx_by_bmc: 2

     os2bmc_tx_by_bmc: 3068

     os2bmc_tx_by_host: 2

     os2bmc_rx_by_host: 3068

     tx_hwtstamp_timeouts: 0

     rx_hwtstamp_cleared: 0

     rx_errors: 0

     tx_errors: 0

     tx_dropped: 0

     rx_length_errors: 0

     rx_over_errors: 0

     rx_frame_errors: 0

     rx_fifo_errors: 0

     tx_fifo_errors: 0

     tx_heartbeat_errors: 0

     tx_queue_0_packets: 6170

     tx_queue_0_bytes: 400752

     tx_queue_0_restart: 0

     rx_queue_0_packets: 12434

     rx_queue_0_bytes: 2916614

     rx_queue_0_drops: 0

     rx_queue_0_csum_err: 0

     rx_queue_0_alloc_failed: 0

 




-----
No viruses found in this message
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit 
http://communities.intel.com/community/wired

Reply via email to