I built the driver as a loadable module and it crashes on load, I've loaded
the driver without the card and found that the module loads, so the built
driver binary is good. I've taken some snapshot of the crash, if you're
interested let me know, I'll pass to you.

Thanks,
Hasan
-----Original Message-----
From: Hasan Jamal [mailto:hja...@connecttech.com] 
Sent: August-04-16 4:44 PM
To: 'Alexander Duyck'; 'Fujinaka, Todd'
Cc: e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] Intel's Ethernet 10G 2P X710 Adapter driver for
Linux 3.10.96 ARM64

Hi Alex,

Thanks for the info.
I've tried to load as part of kernel during boot time but it stalled in IRQ.
I'll try loading as a module and let you know whether it works.

Hasan

-----Original Message-----
From: Alexander Duyck [mailto:alexander.du...@gmail.com]
Sent: August-04-16 3:09 PM
To: Fujinaka, Todd
Cc: Hasan Jamal; e1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] Intel's Ethernet 10G 2P X710 Adapter driver for
Linux 3.10.96 ARM64

Hi Jamal,

The driver tarball should work with any architecture, though as Todd said it
probably hasn't been tested with ARM architecture.

I would recommend giving it a try and if you see any build errors then
probably post them back on the list, and if needed I can probably pull in
the necessary ARM maintainers on the Cc for this thread.

- Alex

On Thu, Aug 4, 2016 at 8:39 AM, Fujinaka, Todd <todd.fujin...@intel.com>
wrote:
> Sorry, I have no real idea. We don't make ARM parts here and so you need
to ask an ARM vendor for more help.
>
> Todd Fujinaka
> Software Application Engineer
> Networking Division (ND)
> Intel Corporation
> todd.fujin...@intel.com
> (503) 712-4565
>
>
> -----Original Message-----
> From: Hasan Jamal [mailto:hja...@connecttech.com]
> Sent: Thursday, August 04, 2016 5:32 AM
> To: Fujinaka, Todd <todd.fujin...@intel.com>; 
> e1000-devel@lists.sourceforge.net
> Subject: RE: [E1000-devel] Intel's Ethernet 10G 2P X710 Adapter driver 
> for Linux 3.10.96 ARM64
>
> Hello Todd,
>
> When I search Linux ARM mailing list, I see more than one. If you could
point to the right one then it'd be helpful.
>
> Thanks,
> Hasan
>
> -----Original Message-----
> From: Fujinaka, Todd [mailto:todd.fujin...@intel.com]
> Sent: August-03-16 12:29 PM
> To: Hasan Jamal; e1000-devel@lists.sourceforge.net
> Subject: RE: [E1000-devel] Intel's Ethernet 10G 2P X710 Adapter driver 
> for Linux 3.10.96 ARM64
>
> The ARM kernel should be the same as the standard Linux kernel, so the
driver should also be the same.
>
> We don't have any ARM hardware to test with so I'd ask the ARM Linux
mailing lists for more information.
>
> Todd Fujinaka
> Software Application Engineer
> Networking Division (ND)
> Intel Corporation
> todd.fujin...@intel.com
> (503) 712-4565
>
>
> -----Original Message-----
> From: Hasan Jamal [mailto:hja...@connecttech.com]
> Sent: Tuesday, August 02, 2016 9:53 AM
> To: e1000-devel@lists.sourceforge.net
> Subject: [E1000-devel] Intel's Ethernet 10G 2P X710 Adapter driver for 
> Linux
> 3.10.96 ARM64
>
> Hello,
>
>
>
> I need the kernel driver source code for ARM64 (Linux For Tegra 24.1, 
> Linux
> 3.10.96) for the following
>
>
>
> (Output by 'lspci')
>
>
>
> 01:00.0 Ethernet controller: Intel Corporation Ethernet 10G 2P X710 
> Adapter (rev 01)
>
>         Subsystem: Intel Corporation Ethernet Converged Network 
> Adapter
> X710-2
>
>         Flags: fast devsel, IRQ 130
>
>         Memory at 20000000 (64-bit, prefetchable) [disabled] [size=8M]
>
>         Memory at 21100000 (64-bit, prefetchable) [disabled] 
> [size=32K]
>
>         [virtual] Expansion ROM at 21000000 [disabled] [size=512K]
>
>         Capabilities: <access denied>
>
>
>
> I tried to use the driver source (i40e) from the vanilla Linux kernel 
> tree
> 3.13 and found that kernel boot process gets stalled when it tries to 
> load the module. I understand that Linux tarball from kernel.org is 
> largely for
> X86 system, let me know if this is not correct. I also tried
i40e-1.5.19.tar.gz and found that also stalls the kernel boot.
>
>
>
> We're stuck on the project and any help is highly appreciated.
>
>
>
> Thanks,
>
> Hasan
>
>
>
>
> ----------------------------------------------------------------------
> -------- _______________________________________________
> E1000-devel mailing list
> E1000-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/e1000-devel
> To learn more about Intel&#174; Ethernet, visit 
> http://communities.intel.com/community/wired



----------------------------------------------------------------------------
--
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit
http://communities.intel.com/community/wired



------------------------------------------------------------------------------
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit 
http://communities.intel.com/community/wired

Reply via email to