You need to update the driver and most likely the firmware. i40e-0.4.10 is really only good for downloading a newer driver. downloadcenter.intel.com is the only place with the firmware updater (you can search x710 or for "NVM Update Utility for Intel(R) Ethernet Ethernet Adapters") but e1000.sourceforge.net has our latest drivers.
Hope that helps. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Lubomir Vogl [mailto:lubo...@vogl.cz] Sent: Monday, November 07, 2016 12:51 AM To: e1000-devel@ <lists.sourceforge.net e1000-devel@lists.sourceforge.net> Subject: [E1000-devel] Intel X710-DA2 after 30 minutes kernel crash Hi, I buy "Intel X710-DA2" and insert in one SFP+ 10Gb modul. After inserting to our linux router all working, but after 30 minutes kernel crash. Before this all communication working and bit rate through NIC is about 200Mb. Can you help me ? I don't know if problem is linux (software) or hardware. Motherboard is Supermicro X10SLL-F I use PCIe 16x slot. in /var/lof/messages I found Nov 3 06:47:52 rco kernel: [ 1850.532801] i40e 0000:01:00.1: Malicious Driver Detection event 0x00 on TX queue 16 of function 0x00 Nov 3 06:47:53 rco kernel: [ 1852.044045] i40e 0000:01:00.1: Detected Tx Unit Hang Nov 3 06:47:53 rco kernel: [ 1852.044045] VSI <391> Nov 3 06:47:53 rco kernel: [ 1852.044045] Tx Queue <0> Nov 3 06:47:53 rco kernel: [ 1852.044045] next_to_use <15f> Nov 3 06:47:53 rco kernel: [ 1852.044045] next_to_clean <c0> Nov 3 06:47:53 rco kernel: [ 1852.044050] i40e 0000:01:00.1: tx_bi[next_to_clean] Nov 3 06:47:53 rco kernel: [ 1852.044050] time_stamp <10005eaf1> Nov 3 06:47:53 rco kernel: [ 1852.044050] jiffies <10005ec6c> Nov 3 06:47:53 rco kernel: [ 1852.044052] i40e 0000:01:00.1: tx hang detected on queue 0, resetting adapter Nov 3 06:47:53 rco kernel: [ 1852.044053] i40e 0000:01:00.1 eth3: tx_timeout recovery level 0 Nov 3 06:47:53 rco kernel: [ 1852.044059] i40e 0000:01:00.1: VSI reinit requested Nov 3 06:47:53 rco kernel: [ 1852.045870] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None I use kernel 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17) x86_64 GNU/Linux and module root@rco:~# modinfo i40e filename: /lib/modules/3.16.0-4-amd64/kernel/drivers/net/ethernet/intel/i40e/i40e.ko version: 0.4.10-k license: GPL description: Intel(R) Ethernet Connection XL710 Network Driver author: Intel Corporation, <e1000-devel@lists.sourceforge.net> srcversion: 264AA1465633C6792B2F089 alias: pci:v00008086d00001585sv*sd*bc*sc*i* alias: pci:v00008086d00001584sv*sd*bc*sc*i* alias: pci:v00008086d00001583sv*sd*bc*sc*i* alias: pci:v00008086d00001581sv*sd*bc*sc*i* alias: pci:v00008086d00001580sv*sd*bc*sc*i* alias: pci:v00008086d0000157Fsv*sd*bc*sc*i* alias: pci:v00008086d00001574sv*sd*bc*sc*i* alias: pci:v00008086d00001572sv*sd*bc*sc*i* depends: ptp,vxlan intree: Y vermagic: 3.16.0-4-amd64 SMP mod_unload modversions parm: debug:Debug level (0=none,...,16=all) (int) when linux starts there is info about NIC root@rco:/tmp/i# cat messages | grep "i40e 0000:01:00.1" Nov 3 06:05:25 rco kernel: [ 930.164541] i40e 0000:01:00.1 eth3: NIC Link is Down Nov 3 06:06:14 rco kernel: [ 979.769603] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:08:08 rco kernel: [ 1093.707147] i40e 0000:01:00.1 eth3: NIC Link is Down Nov 3 06:08:09 rco kernel: [ 1093.953367] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:08:09 rco kernel: [ 1094.232056] i40e 0000:01:00.1 eth3: NIC Link is Down Nov 3 06:17:06 rco kernel: [ 3.343419] i40e 0000:01:00.1: f4.40 a1.4 n04.53 e8000206e Nov 3 06:17:06 rco kernel: [ 3.562422] i40e 0000:01:00.1: MAC address: 3c:fd:fe:a2:1a:75 Nov 3 06:17:06 rco kernel: [ 3.631640] i40e 0000:01:00.1: i40e_ptp_init: added PHC on eth3 Nov 3 06:17:06 rco kernel: [ 3.643357] i40e 0000:01:00.1: PCI-Express: Speed 8.0GT/s Width x8 Nov 3 06:17:06 rco kernel: [ 3.643358] i40e 0000:01:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 8 RSS FD_ATR FD_SB NTUPLE DCB PTP Nov 3 06:17:06 rco kernel: [ 5.313300] i40e 0000:01:00.1: add filter failed, err -53, aq_err 14 Nov 3 06:17:06 rco kernel: [ 5.687371] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:18:36 rco kernel: [ 95.647781] i40e 0000:01:00.1: ntuple filter loc = 216, could not be added Nov 3 06:18:36 rco kernel: [ 95.647784] i40e 0000:01:00.1: FD filter space full, ATR for further flows will be turned off Nov 3 06:25:23 rco kernel: [ 502.595119] i40e 0000:01:00.1: Malicious Driver Detection event 0x00 on TX queue 16 of function 0x00 Nov 3 06:25:24 rco kernel: [ 503.815769] i40e 0000:01:00.1: Detected Tx Unit Hang Nov 3 06:25:24 rco kernel: [ 503.815778] i40e 0000:01:00.1: tx_bi[next_to_clean] Nov 3 06:25:24 rco kernel: [ 503.815780] i40e 0000:01:00.1: tx hang detected on queue 0, resetting adapter Nov 3 06:25:24 rco kernel: [ 503.815782] i40e 0000:01:00.1 eth3: tx_timeout recovery level 0 Nov 3 06:25:24 rco kernel: [ 503.815817] i40e 0000:01:00.1: VSI reinit requested Nov 3 06:25:24 rco kernel: [ 503.817610] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:29:46 rco kernel: [ 765.445784] i40e 0000:01:00.1: Malicious Driver Detection event 0x00 on TX queue 16 of function 0x04 Nov 3 06:29:47 rco kernel: [ 766.663472] i40e 0000:01:00.1: Detected Tx Unit Hang Nov 3 06:29:47 rco kernel: [ 766.663475] i40e 0000:01:00.1: tx_bi[next_to_clean] Nov 3 06:29:47 rco kernel: [ 766.663476] i40e 0000:01:00.1: tx hang detected on queue 4, resetting adapter Nov 3 06:29:47 rco kernel: [ 766.663478] i40e 0000:01:00.1 eth3: tx_timeout recovery level 0 Nov 3 06:29:47 rco kernel: [ 766.663495] i40e 0000:01:00.1: VSI reinit requested Nov 3 06:29:47 rco kernel: [ 766.665324] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:47:52 rco kernel: [ 1850.532801] i40e 0000:01:00.1: Malicious Driver Detection event 0x00 on TX queue 16 of function 0x00 Nov 3 06:47:53 rco kernel: [ 1852.044045] i40e 0000:01:00.1: Detected Tx Unit Hang Nov 3 06:47:53 rco kernel: [ 1852.044050] i40e 0000:01:00.1: tx_bi[next_to_clean] Nov 3 06:47:53 rco kernel: [ 1852.044052] i40e 0000:01:00.1: tx hang detected on queue 0, resetting adapter Nov 3 06:47:53 rco kernel: [ 1852.044053] i40e 0000:01:00.1 eth3: tx_timeout recovery level 0 Nov 3 06:47:53 rco kernel: [ 1852.044059] i40e 0000:01:00.1: VSI reinit requested Nov 3 06:47:53 rco kernel: [ 1852.045870] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None Nov 3 06:52:10 rco kernel: [ 2109.030882] i40e 0000:01:00.1: Malicious Driver Detection event 0x00 on TX queue 16 of function 0x04 Nov 3 06:52:12 rco kernel: [ 2110.895130] i40e 0000:01:00.1: Detected Tx Unit Hang Nov 3 06:52:12 rco kernel: [ 2110.895133] i40e 0000:01:00.1: tx_bi[next_to_clean] Nov 3 06:52:12 rco kernel: [ 2110.895134] i40e 0000:01:00.1: tx hang detected on queue 4, resetting adapter Nov 3 06:52:12 rco kernel: [ 2110.895136] i40e 0000:01:00.1 eth3: tx_timeout recovery level 0 Nov 3 06:52:12 rco kernel: [ 2110.895141] i40e 0000:01:00.1: VSI reinit requested Nov 3 06:52:12 rco kernel: [ 2110.896931] i40e 0000:01:00.1 eth3: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None -- LubomÃr Vogl ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
