The blinking appears to be implementation dependent, so there's a chance that whoever made your board made it difficult to blink. Please contact the board manufacturer for help.
Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation [email protected] (503) 712-4565 -----Original Message----- From: Padam Jeet Singh [mailto:[email protected]] Sent: Wednesday, December 14, 2016 3:29 AM To: [email protected] Subject: [E1000-devel] LED Blink (identification) not working on i354 + Marvell 88E1543 PHY Hello, The LED blink function (ethtool -p) works fine for certain adaptors based on i211. However, on a board with Atom C2000 CPU with 4 X i354 NICs and the Marvell 88E1543 PHY this doesn’t work. ethtool -p does not return an error, but the identification LEDs don't blink. Kernel version is 3.10.101 and we are using kernel drivers. Can someone point to me to why this is happening and what possible fixes are needed? Thanks, Padam ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
