Hello, We notice that when using two igb ports as a bridge, if we use pktgen to drive traffic through the bridge and randomize (or use a very large range) for the source IP addr in pktgen, then performance of igb is very poor (like 150Mbps throughput instead of 1Gbps). It runs right at line speed if we use same src/dest IP addr in pktgen. So, seems it is related to lots of src/dest IP addresses.
We see same problem when using pktgen to send to itself, and we see this in several different kernels. We specifically tested bridge mode in this stock Fedora kernel: Linux lfo350-59cc 4.9.13-101.fc24.x86_64 #1 SMP Tue Mar 7 23:48:32 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux e1000e does not show this problem in our testing. Any ideas what the issue might be and how to fix it? Thanks, Ben -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
