This sounds very much like a question we are getting internally from several different avenues. If this is the case, please work through the internal support (Intel Premier Support for you).
Todd Fujinaka Software Application Engineer Data Center Group Intel Corporation todd.fujin...@intel.com -----Original Message----- From: Kiran Pamula <kirankumar.pam...@gmail.com> Sent: Saturday, April 11, 2020 12:44 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] Help Needed. Hi Experts, We are using one gig NIC 82574L with e100e driver. Facing following problem of interface TX queue getting wedged. Kindly provide the debug steps to debug the problem. #ethtool -i eth0 driver: e1000e version: 2.4.14-NAPI firmware-version: 2.1-0 bus-info: 0000:12:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: Here from debug logs added in the TX descriptor txr->next_to_clean parameter got stuck at same. This value will change once you shut and unshut of specific interface. Thanks, Kiran _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet
